Posts: 8
Threads: 2
Joined: Nov 2017
Whats up.
So for the upcoming 2018 F-Class matches here in NC I am thinking about ordering a T-Box barrel and doing it at 20" on a 14" gas system. This would be the same dwell time as a 18" on rifle gas system. Twist rate is 1:7.5
Any of you run a 20 XL gas system?
John
Posts: 8,507
Threads: 241
Joined: Sep 2014
Haven't seen that combo yet.
Have seen 20" MLGS, which doesn't make any sense to me, but not ELGS.
Reasoning behind considering 20" ELGS? 20" RLGS Grendels are one of the smoothest-running set-ups I've shot, and I've tested a lot of them with several different barrels, to include:
AA/Satern fluted
Templar/Bartlein
Lilja AR740
PF/Criterion
PF/Bartlein
AA/Shilen
AA Entry Level
What bullet are you planning on shooting for F Class? A 20" ELGS might work well with 130gr and slow powder, but there might not be enough port pressure and flow for even factory 123gr loads.
Could be tuned to work with Low-Mass carrier and JP SCS recoil system maybe.
NRA Basic, Pistol, Rifle, Shotgun, RSO
CCW, CQM, DM, Long Range Rifle Instructor
6.5 Grendel Reloading Handbooks & chamber brushes can be found here:
www.AR15buildbox.com
Posts: 8
Threads: 2
Joined: Nov 2017
Great points and I do not know.
I think the unknown is what interested me in this idea.
