+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Bolt Actions & Single Shots (https://65grendel.com/forumdisplay.php?fid=17)
+--- Thread: Grendelized CZ 527 (/showthread.php?tid=9371)
Pages:
1
2
Grendelized CZ 527 - kmon - 05-18-2015
Picked up my CZ 527 that started as a 7.62X39 carbine and now wears a straight fluted 22 inch Obermeyer 1:8.4 barrel, chambered with a minimum sized SAAMI spec reamer. Action blue printed and squared with the barrel. Factory stock was used but is now glass and pillar bedded with the barrel channel opened up to get rid of the cutouts for the rear sight, the barrel is profiled to fit the new channel contour and free floated the entire length. For mounting the scope I got a DIP products 20moa rail, with it standard low rings will work so will pick those up tomorrow and finish mounting the scope. Will take pictures and post after that. Hopefully will get to shoot it some Tuesday
Work was done by Scott Weichel in Wylie Texas. Though this was his first CZ conversion I doubt it will be his last. He enjoyed the task and made tools along the way to making it a more repeatable job and is talking about how he likes the way it turned out enough to possibly build one for his daughter.
Grendelized CZ 527 - LRRPF52 - 05-18-2015
Looking forward to the pics. Sounds like a great stick. This is the plan for my kids too.
Grendelized CZ 527 - kmon - 05-18-2015
The pics I took today do not do it justice so will get some shots tomorrow outside in better lighting. Like the rail over the CZ rings as the 20 MOA cant raises the ocular end of the scope allowing for bigger ocular scopes to be used without using as high of scope rings. Will be cutting off part of the rail that will not be used and hangs off the front of the receiver. Will be mounting a 3X9-42 Kahles on it for now, thinking about a 3.5X21 Bushnell for a future scope for long range shooting and hunting
Grendelized CZ 527 - kmon - 05-18-2015
Still have to get some lower rings. Weight as pictured 7.4 lbs
![[Image: 6.5G_zpssha2fwdg.jpg]](http://i159.photobucket.com/albums/t136/kmon1/6.5G_zpssha2fwdg.jpg)
![[Image: 6.5G2_zpsm9vwmawu.jpg]](http://i159.photobucket.com/albums/t136/kmon1/6.5G2_zpsm9vwmawu.jpg)
Grendelized CZ 527 - 65Whelen - 05-18-2015
Oh I like that! Range report soon I hope.
Grendelized CZ 527 - BluntForceTrauma - 05-18-2015
Diggin' 65G micro-actions! Nice job!
Grendelized CZ 527 - southern180 - 05-18-2015
Ok very nice, whats a barrel and the smith work add up to?. trying to figure it into a budget , just ball park if you would,
Grendelized CZ 527 - ramslammer - 05-19-2015
G'Day
Nice rifle!! How it shoots as awesome as it looks.
Juddy
Grendelized CZ 527 - am4966 - 05-19-2015
Man that looks nice! I see a boltie in my future.
Grendelized CZ 527 - FW Conch - 05-19-2015
Beautiful! :-)
And at 7.4#'s, that is exactly why many of us are interested in the "shortie" CZ!
Grendelized CZ 527 - Variable - 05-19-2015
Sweet!
Grendelized CZ 527 - NugginFutz - 05-19-2015
Super nice! Almost makes me wish I'd held onto my 527 in .223 - how hard can locating a donor bolt be?
I like the rail, but I wonder if you will need a cheek riser as my CZ-550 did when I added a 20 moa rail to it.
In any case, really looking forward to your range report.
Grendelized CZ 527 - kmon - 05-21-2015
Not the greatest day for a range trip but made one today, wind was 5 to 15mph gusting sometimes a little stronger.
Shot some Hornady SST factory loads, the 2 five shot groups looked about the same with more windage dispersion than what I like but is that it is. Still getting used to this little rifle but love the way it handles. I am sure with reloads and better wind conditions it will get better
![[Image: 20150520_221323_zpsw45izwdq.jpg]](http://i159.photobucket.com/albums/t136/kmon1/20150520_221323_zpsw45izwdq.jpg)
Those are one inch squares, Range was 100 yards
Grendelized CZ 527 - VASCAR2 - 05-21-2015
Your CZ sure looks like a keeper to me, nice!
Grendelized CZ 527 - LRRPF52 - 05-21-2015
Sub-MOA 5rd group from a lightweight micro-action bolt gun? That's a great shooting little fire stick.
Grendelized CZ 527 - Buck2732 - 05-23-2015
[ATTACH=CONFIG]6523[/ATTACH]
Mine has a twin I did not know about...
Grendelized CZ 527 - am4966 - 05-23-2015
Nice kmon and love your twin buck
Grendelized CZ 527 - kmon - 05-23-2015
Like your rifle Buck, have to get one of the cheek pads on mine. Getting a solid cheek weld would help accuracy and comfort.
The Smith that put mine together uses CNC machinery and has the programs saved along with the extra tools he made for this conversion. He is setup now for duplicating this rifles barrel and the stockwork he did.
Grendelized CZ 527 - Buck2732 - 05-23-2015
kmon Wrote:Like your rifle Buck, have to get one of the cheek pads on mine. Getting a solid cheek weld would help accuracy and comfort.
The Smith that put mine together uses CNC machinery and has the programs saved along with the extra tools he made for this conversion. He is setup now for duplicating this rifles barrel and the stockwork he did.
Thanks,the cheek piece is from a No4T with a filler to make up the small gap. I think the guys who made mine have done the same keeping the tooling requirements.
When I got mine added to my licence there was only 31 in the whole of the UK that was in 2012 so that might have changed. It is always a talking piece at any range I go to, so I hope I have converted some people in these parts.
I have taken her to 1000y and she did me proud. Out scoring other shooters using .308 in a howling gale.
I hope yours gives you as much enjoyment mine has done me... If and when I have to re-barrel her it will be with a slightly heavier barrel as she has a very light sporter profile at the moment.
Grendelized CZ 527 - Drift - 05-23-2015
Regarding the cheek pad on a CZ 527. One of the flaws in a CZ 527 is that the scope must be mounted very high because of the shape of the factory bolt handle. I first put a cheek pad on mine and that helped a lot with cheek weld, but the little rifle was still unbalanced. I found an aftermarket bolt handle on the net (I forget who but they are still in business) that allowed me to lower the scope, improving my cheek weld and rifle balance.