![]() |
|
Silencerco Omega - Printable Version +- 6.5 Grendel Forum (https://65grendel.com) +-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3) +--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8) +--- Thread: Silencerco Omega (/showthread.php?tid=8954) |
Silencerco Omega - am4966 - 01-30-2015 Emailed Silencerco and they say the Omega is rated to 16" for the Grendel. Which totally sucks! I was looking at getting one for my 12.5" build. Guess I'll need to move on to another can. :p Silencerco Omega - Variable - 01-30-2015 Well that sucks. I figured it'd be good for shorter than that. The Templar Ark30 I ordered (SBR PMS version) is rated for 5.56 down to 7" barrels. I figured that'd be plenty safe for a Grendel at 12.5". I haven't received it yet, so I can't say how good/bad it may be. The new Thunderbeast cans look like they might be good too. Liberty was willing to make me a custom 6.5 bored version of their "Triumph" can. They wanted a steep premium for it though, so i went with the (also pricey) Templar instead. Silencerco Omega - am4966 - 01-30-2015 For some reason they are comparing the Grendel to a .308 since that's the same length that it's rated to. I think the tech has something confused, or maybe not. Silencerco Omega - keystone183 - 01-30-2015 I would be pretty confident the reason they say that is because the have not tested it. Rated to 10" on 556. I would not hesitate to run it on a 10" grendel. Silencerco Omega - lead chucker - 01-30-2015 I have a cyclone that I intend to use on a 12.5" grendel build. I use it on my 8" blkout with sub's and super. I also used it on a 7.5" 5.56. Silencerco Omega - PigOPs - 01-30-2015 Guess it's a good thing I went with the Saker 7.62... I was think my next purchase may be the omega though... You ought to press them on it a little bit explaining that the pressures associated with the Grendel are comparable to the 5.56. Silencerco Omega - LRRPF52 - 01-30-2015 Grendel pressures are lower at the chamber. Depending on the load, it can be elongated farther out, but a can that will handle 5.56 should have zero issues with 6.5 Grendel. The ThunderBeast Ultra 7 has been undergoing abusive testing on a short barreled 300 Win Mag. They've already hit 3000 rounds, with no issues. The new Ultra series has been pushed to the max in terms of performance, lightweight, and strength. The cans felt like .22LR aluminum cans, they are that light. Blew my mind really. Silencerco Omega - 81police - 03-04-2015 Just saw this thread. I've got an Omega on order to put on an 18" Grendel. Will post thoughts on it in 6-7 months LOL Silencerco Omega - burnsome - 03-05-2015 I run a 308 Gemtec HVT on my 12-inch Grendel. No problems whatsoever. Just updated the rifle with a rail system and adjustable gas block. runs like a champ and isnt too heavy to lug around in the woods. I'm thinking towards updating the optics with an IR MkII thermal scope this year. Silencerco Omega - NugginFutz - 03-05-2015 +1 Gemtec HVT stacks up well for SBR use: http://www.gem-tech.com/store/pc/HVT-THD-10p91.htm Quote:Features: (Emphasis mine) Silencerco Omega - lead chucker - 03-05-2015 LRRPF52 Wrote:Grendel pressures are lower at the chamber. Depending on the load, it can be elongated farther out, but a can that will handle 5.56 should have zero issues with 6.5 Grendel. I love my Cyclone but I hope to purchase a Tbac ultra 7 in the next few months. The grendel is a great round suppressed. Much quieter than you would think! Silencerco Omega - burnsome - 03-05-2015 |