+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Build-It-Yourself & Custom Builds (https://65grendel.com/forumdisplay.php?fid=9)
+--- Thread: New comer ferst 6.5grendel builder (/showthread.php?tid=8869)
Pages:
1
2
New comer ferst 6.5grendel builder - chase - 01-12-2015
Hi out there looking forward to your wisdom and tips in this build. I have already got a lot of my parts and I will give a list of them . First my barrel is a 20" 5R 1-8 twist 8flute 920 Hbar Bartlein by PF with supper match carrier,bolt and low profile gas block. I have about three more weeks to wait for it.
Seekins billet upper and lower.
Vltor buffer tube.
Ares armor buffer spring.
Spikes ST-T2 buffer.
Geissele SSA trigger.
KNS trigger pins.
Battle Arms safety selector.
ATI grip.
What I need help with is a good sturdy fore arm ,butt stock and bipod.
New comer ferst 6.5grendel builder - tango29 - 01-12-2015
Try Samson or Daniel or Midwest. All three are good.for a buttstock try the magpul UBR
New comer ferst 6.5grendel builder - TacBlade - 01-12-2015
I have a Samson Freefloat forearm on mine and love it!!!
New comer ferst 6.5grendel builder - am4966 - 01-12-2015
Seekins, SLR Rifleworks great products at a fair price. Love your parts list so far, are you going to lap the upper? Seems most of use have/are doing this. Great easy way to make sure your upper is square.
New comer ferst 6.5grendel builder - jurassic - 01-12-2015
A billet Seekins upper will not need to be lapped.
New comer ferst 6.5grendel builder - LRRPF52 - 01-12-2015
jurassic Wrote:A billet Seekins upper will not need to be lapped.
I was going to say the same thing.
New comer ferst 6.5grendel builder - chase - 01-13-2015
Gun Connection in Taylor Texas. Great guy is going to help me with this build. said if it needs laped he will do it . Match and polish the ramps and check head spase
New comer ferst 6.5grendel builder - chase - 01-13-2015
I am looking in to the Samson
New comer ferst 6.5grendel builder - chase - 01-13-2015
LRRPF52 Wrote:I was going to say the same thing.
Hope you are right. If nothing needs done then nothing will be done. This is my most expensive and my first Grendel build. Just want to be safe. Thinks for all and any advice.
New comer ferst 6.5grendel builder - am4966 - 01-13-2015
chase Wrote:Hope you are right. If nothing needs done then nothing will be done. This is my most expensive and my first Grendel build. Just want to be safe. Thinks for all and any advice.
If it does need lapped its a 5-10 min procedure and will only benefit you. I'm of the school that what's the harm to check since its so easy to do. Again looking forward to your final build
New comer ferst 6.5grendel builder - Joseph5 - 01-13-2015
I used a Wilson Combat trim rail on mine and I really like it. You would need to use one of their gas blocks with it but they make adj and non-adj blocks that come with gas tubes installed. Here is a thread about what I did with my Trim Rail. http://www.65grendel.com/forum/showthread.php?8884-Wilson-Trim-Rail-Barrel-Nut.
New comer ferst 6.5grendel builder - chase - 01-14-2015
tango29 Wrote:Try Samson or Daniel or Midwest. All three are good.for a buttstock try the magpul UBR
What do you think of the Wilson slim rail?
New comer ferst 6.5grendel builder - chase - 01-15-2015
Forgot all about my charging handle . got it today . went with a Noveske Raptor.
New comer ferst 6.5grendel builder - usmc1371 - 01-15-2015
Make sure you post pics. If you don't like I will take it off you for a small disposal fee. Just kidding.
New comer ferst 6.5grendel builder - chase - 02-08-2015
From what I hear I still have two to three weeks before my barrel is done . I am going nuts I cant wait !!
New comer ferst 6.5grendel builder - chase - 02-11-2015
Thinking of using the new Geisgele M lock forearm ? Looks like it will fit my Seekins upper and looks good.
New comer ferst 6.5grendel builder - Drillboss - 02-12-2015
Here's one that may seem obvious. I bought my barrel with a headspaced bolt, therefore figured I just needed to buy a bolt carrier. When I went to put everything together, I didn't have a firing pin, firing pin retainer, or a bolt cam pin. Once again, the devil's in the details.
And I'll throw a plug in for Wilshire Guns in OKC. They sold me what I needed out of a BCG they had on hand the next day.
New comer ferst 6.5grendel builder - jurassic - 02-12-2015
I have several ALG Defense M-Lok hand guards, they are really nice at any price. If you are not using a standard forged upper make sure it's standard dimensions at the point the gas tube goes into the upper. The hand guards have anti-rotation tabs that will not work with some of the beefy billet uppers.
New comer ferst 6.5grendel builder - chase - 02-22-2015
Got grate news! My barrel is going to ship this week . I'm so excited I thought I would have to get some depends.. Now the problem is no one has a 15'' M-lok hand guard like I want in stock. My go to guy has a 15'' Daniel Defense Lite rail III but I do not know if its 1.08'' inside is to small for a .920 low profile gas block? and how much flex it will have?
New comer ferst 6.5grendel builder - chase - 03-07-2015
It is done. But I don't no how to post a picture