+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Build-It-Yourself & Custom Builds (https://65grendel.com/forumdisplay.php?fid=9)
+--- Thread: Want to build a left eject grendel (/showthread.php?tid=8628)
Want to build a left eject grendel - tackdriver - 11-22-2014
I have been thinking that the taper on the cam pin hole will prevent just spinning the bolt 180 degrees to get the extractor on the correct side. Does anyone know of a bolt manufacturer that would sell or manufacturers a 6.5g left hand bolt
Want to build a left eject grendel - am4966 - 11-22-2014
I did a search and someone mentioned Quality Arms Idaho
Want to build a left eject grendel - bwaites - 11-22-2014
It's been done a time or two, but you can't just flip the bolt. I believe the others bought left hand Stag guns and had unfinished bolts opened up and then heat treated, but it was done as one offs and they hinted that they were sworn to secrecy about who did the work.
Want to build a left eject grendel - tackdriver - 11-22-2014
I was planning on using the stag upper and I know the can pin won't go in on the other side of the bolt. I have a message in to Quality Arms and will pass on whatever info i get.