+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Build-It-Yourself & Custom Builds (https://65grendel.com/forumdisplay.php?fid=9)
+--- Thread: Brownells 6.5 Grendel Barrel & Bolt sets (/showthread.php?tid=8342)
Pages:
1
2
Brownells 6.5 Grendel Barrel & Bolt sets - Larry in SD - 09-19-2014
If this has been asked before I apologize as I looked and did not find it.
Been wanting to build a 6.5 Grendel for quite a while now but still can not seem to save up the needed funds (however I am working on it). I looking at Brownells I see they have listed 18" & 24" 6.5 Grendel Barrels that come with a Bolt. The details show a 5R Rifling with 1 in 8" Twist for the 24" Barrel much the same that Midway USA lists for their barrel(s).
What can the experts here tell me about the Brownells 6.5 Grendel Barrels?
Thanks
Larry
Brownells 6.5 Grendel Barrel & Bolt sets - m796rider - 09-19-2014
This might help: http://www.65grendel.com/forum/showthread.php?7845-Grendel-Barrels-in-stock-at-Brownells
Brownells 6.5 Grendel Barrel & Bolt sets - VASCAR2 - 09-19-2014
Good to see they have 18" back in stock. I've seen two 18" barrels from Brownell's in 6.5 Grendel which were very good. I'm tempted to buy one even though I don't need it. If I didn't already have a 16" and 20" 6.5 Grendel I'd buy an 18 or 24 Brownell's 6.5 Grendel barrel.
Brownells 6.5 Grendel Barrel & Bolt sets - Larry in SD - 09-20-2014
Thanks guys
Brownells 6.5 Grendel Barrel & Bolt sets - Apparition - 09-20-2014
I have both the 18 and the 24. The 18 is shooting sub moa but I haven't mounted the 24. They are very nice barrels for the money.
http://www.65grendel.com/forum/showthread.php?8826-Shooting-the-Brownell-s-18-quot-Grendel-barrel.&highlight=Brownells
Brownells 6.5 Grendel Barrel & Bolt sets - m796rider - 10-01-2014
The Brownells 6.5 Grendel barrels can definitely shoot!
I just mounted up my 18" Brownells barrel yesterday, zeroed it, and shot a .729MOA 5-shot group at 100 yards using a messenger bag to support the rifle. Ammo was factory Hornady 123gr SST -- no problems feeding, shooting, or extracting, and primers looked good.
![[Image: target.png]](http://personal.visualitymedia.com/personal/misc/target.png)
Brownells 6.5 Grendel Barrel & Bolt sets - lrgrendel - 10-01-2014
Larry in SD Wrote:If this has been asked before I apologize as I looked and did not find it.
Been wanting to build a 6.5 Grendel for quite a while now but still can not seem to save up the needed funds (however I am working on it). I looking at Brownells I see they have listed 18" & 24" 6.5 Grendel Barrels that come with a Bolt. The details show a 5R Rifling with 1 in 8" Twist for the 24" Barrel much the same that Midway USA lists for their barrel(s)
What can the experts here tell me about the Brownells 6.5 Grendel Barrels?
Thanks
Larry
What weight bullets would suit the 1/8 twist? I realize it has been asked before but.....
Brownells 6.5 Grendel Barrel & Bolt sets - VASCAR2 - 10-01-2014
The 1:8 twist should handle 85 grain through 130 grain bullets in the 6.5 Grendel. I've seen test with 140 grains which were stabilized in 1:8 but had pretty low velocity around 2100 FPS IIRC.
Brownells 6.5 Grendel Barrel & Bolt sets - lamrith - 10-04-2014
I haven't seen it mentioned so far in the Brownells threads I have skimmed. What is the chamber on these? Saami, G2..?
Brownells 6.5 Grendel Barrel & Bolt sets - Captk - 10-05-2014
Do these barrels come with a bolt?
BTW, Brownells has free shipping on orders over $150 till 1/01/2015.
http://www.brownells.com/coupons
Ken
Brownells 6.5 Grendel Barrel & Bolt sets - Dave Bob - 10-05-2014
Captk Wrote:Do these barrels come with a bolt?
BTW, Brownells has free shipping on orders over $150 till 1/01/2015.
http://www.brownells.com/coupons
Ken
Yes
Dave
Brownells 6.5 Grendel Barrel & Bolt sets - lamrith - 10-05-2014
There are also coupons for:
Free shipping over $75 (domestic only)
$15 off orders $100+
7.5% off all orders
$50 off orders $300+(I went for last this one)
Google search "Brownells discount code" I chose second link to http://www.promocode4share.com
Brownells 6.5 Grendel Barrel & Bolt sets - Captk - 10-08-2014
Do the barrel and bolt combo need to have the head space checked? Putting together a list of parts for my build, my previous AR's came assembled so I never needed to check head space.
Thanks, Ken
Brownells 6.5 Grendel Barrel & Bolt sets - VASCAR2 - 10-08-2014
Captk Wrote:Do the barrel and bolt combo need to have the head space checked? Putting together a list of parts for my build, my previous AR's came assembled so I never needed to check head space.
Thanks, Ken
No, the purpose of selling the barrel and bolt together is to ensure you have the correct head space. My Silen and my two Friends Brownell's each came with a bolt and were GTG. Their two Brownell's barrels have been good shooters. One was getting MOA to 900 meters on the Ft Campbell range. Needless to say he was esstatic.
Brownells 6.5 Grendel Barrel & Bolt sets - TacBlade - 10-09-2014
Well, I read this post and bought a barrel from Brownell's!!! Thanks guys, my wife is going to be Pissed Off!!!
Brownells 6.5 Grendel Barrel & Bolt sets - NugginFutz - 10-09-2014
Just be aware that you will likely get one of the GII chambered barrels, which have neither the compound throat of the Grendel or the narrower neck diameter of the 264 LBC. Caveat Emptor.
Brownells 6.5 Grendel Barrel & Bolt sets - VASCAR2 - 10-09-2014
TacBlade Wrote:Well, I read this post and bought a barrel from Brownell's!!! Thanks guys, my wife is going to be Pissed Off!!!
You'll have to post a range report when you get your rifle together.
Brownells 6.5 Grendel Barrel & Bolt sets - lamrith - 10-09-2014
I jumped in too, ups shows landing Monday, gonna be a looong week after it arrives waiting to get to the range on the weekend!
Brownells 6.5 Grendel Barrel & Bolt sets - TacBlade - 10-11-2014
Larry In SD, is that South Dakota?
Brownells 6.5 Grendel Barrel & Bolt sets - Captk - 10-14-2014
My barrel (24") and bolt arrived today, waiting for the rest of my parts.