Hornady OAL Gauge (bent for semi) Modification? - Printable Version +- 6.5 Grendel Forum (https://65grendel.com) +-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3) +--- Forum: 6.5 Grendel Ammunition & Reloading (https://65grendel.com/forumdisplay.php?fid=10) +--- Thread: Hornady OAL Gauge (bent for semi) Modification? (/showthread.php?tid=7403)

Hornady OAL Gauge (bent for semi) Modification? - PigOPs - 02-26-2014 I bought the LNL OAL gauge and modified case... however, because of the extension beyond the threads on the gauge I cannot seat my bullet deep enough into the gauge to get a good reading. I understand now that most of you use the straight one but I am not going to fork over the extra coin to change now... Have any of you modified this particular gauge to work? Hornady OAL Gauge (bent for semi) Modification? - Walter - 02-26-2014 I have that gage and use it with no problem. I am not sure of what you problem is. Got a pic? Hornady OAL Gauge (bent for semi) Modification? - PigOPs - 02-26-2014 Where my fingertip is is too long... With the modified case in place an sst is over 2.300" simply resting against that extension... I'm wondering if anyone has ground it down or cut it off or anything. Hornady OAL Gauge (bent for semi) Modification? - Walter - 02-27-2014 What kind of barrel are you using it on. Would it be a liberty by chance? I have the same problem. I just do not screw it all the way down. It still works fine. I thought about shorting it, but I want to use it on 223. Hornady OAL Gauge (bent for semi) Modification? - Everrest - 02-27-2014 I had to grind mine down in order to use it with the 6.5 grendel and the 123 AMax. I modified mine a year ago. This mod has nothing to due with what type of barrel you have. It still works with other calibers. I think I trimmed mine 0.100". Hornady OAL Gauge (bent for semi) Modification? - PigOPs - 02-27-2014 I did mine as well. Works like a champ now...