+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Build-It-Yourself & Custom Builds (https://65grendel.com/forumdisplay.php?fid=9)
+--- Thread: Home made bag rider (/showthread.php?tid=736)
Home made bag rider - rasp65 - 07-08-2011
I built some bag riders for the buttstock of my AR's. Picture 8 & 11 are on an A2 stock. I removed the sling mount and cut it apart and welded it to a piece of flat stock and welded a piece of a 3/4" shaft to it. Pictures 2 & 6 are on a colapsable stock it is made from a piece of flat stock welded to a 1" angle and a nut welded to the flatstock to secure it. O the colapsable stock the bag rider sits at 90 degrees where on the A2 it required a slight bend to sit paralell with the aluminium plates attached to the forearm.