+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8)
+--- Thread: Bedding with loctite building a DM rifle (/showthread.php?tid=7321)
Bedding with loctite building a DM rifle - yocan - 02-14-2014
So I just picked up the parts to make a good fun to 400 meters maybe even 600 meters. This is going together tuesday
So basically I have a fairly nice 1/8" 20" stainless barrel with a battle comp on the end. Going on a billet omega upper and lower. with a Midwest Industries FF gen 2 SS series. thats been proffessionally cut to 14" (IMO ends better than how MI cut it) Got a geissle ssa-e trigger,
Do I loctite bed the barrel to the reciever? if I do, can I put another barrel in it when I burn this one out?
Side question suggestion on a stock? Right now its getting a CTR because I have 2 and I'm undecided.
Basically I'm warming up with this and then switching in my 6.5 barrel. Or if I bed will I need a new reciever.
I haven't bed the 556 barrel yet , debating how to do that.
Bedding with loctite building a DM rifle - LRRPF52 - 02-14-2014
Is the barrel extension loose in the upper when you test-fit it?
Is the upper receive face square?
Is the current barre a .223 then?