+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Target & Competition Shooting (https://65grendel.com/forumdisplay.php?fid=12)
+--- Thread: range day with factory 123SST (/showthread.php?tid=6968)
range day with factory 123SST - Kikn - 12-29-2013
I initially went to the range today to sight in my Beowulf at 100 since I got my scope back from repair from trijicon. And test out the new reloads I made up for it. While I was there I decides to check my 200 yard zero on the grendel. In the process I decided to stay a while longer and shoot for a spell at 300, 400, and 500
All 5 shots were taken on 5x zoom in under 5 seconds total from the firing of the first shot.
The only two pictures I took were from 400 and 500
After shooting I decided to shoot at the 4"x4" steel at 500 which I hot 3 times In a row right after shooting the 5 at 500 after that I only hit it one more time after 10+ shots. I think the barrel just got to dirty since it hadn't been clean in a few months of use and my shots started to go all over the place shortly after. But all on all it was a fun day
Tech stuff
55-60° F
5mph wind mostly at my back.
Dope used: 16" barrel
100 yd. = -.7 mil
200 yd. = 0
300 yd = 1 mil
400 yd = 2 mil
500 yd = 3.3 mil
range day with factory 123SST - LRRPF52 - 12-29-2013
Your vertical dispersion on the left target is amazing. What barrel length do you have?
range day with factory 123SST - Kikn - 12-29-2013
It a 16" pipe