+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Bolt Actions & Single Shots (https://65grendel.com/forumdisplay.php?fid=17)
+--- Thread: Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? (/showthread.php?tid=6875)
Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? - Trooper - 12-13-2013
This sounds like the best rifle/pistol to start with.
http://www.eabco.com/tcref.html
http://www.eabco.com/6.5_mm_cartridges.html
Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? - LRRPF52 - 12-13-2013
Bob Stokes has, and it also makes a beautiful little T/C Contender:
Fanofflyn on his Audad Hunt
http://www.65grendel.com/forum/showthread.php?1578-6.5-Grendel-TC-Contender
Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? - hm2 clark - 12-13-2013
I got a couple of barrels. What do you want to know? For sale right now ..a number on math grade machne site.
Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? - hm2 clark - 12-13-2013
Oh If I had it to do over again, I'd probably go with the contender grendel.
Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? - stokesrj - 12-13-2013
Here is a short video I put tgether on a 6.5 Grendel Encore I built for my daughter-in-law.
https://vimeo.com/72944868
Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? - JASmith - 12-14-2013
I found these as additional sources of Grendel barrels for the Encore:
http://matchgrademachine.com/6.5mm-barrels/
http://sskindustries.com/6-5-grendel
Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? - GregP42 - 12-22-2013
I talked with MGM Friday about a Grendel Contender. They have decided to offer it for the G2 and Contender frames as well now. Now my question is in a 15" barrel should I get a 1in8" or 1in9" twist?
Greg
Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? - hm2 clark - 12-23-2013
I have MGM Encore. 24" barrel. 1:9 twist. It stabalises 120-125gr bullets well but >129gr SST bullets aren't as accurate. I would go with 1:8 if your going to use the long ones.
Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? - LRRPF52 - 12-23-2013
For a 15" barrel, I would also lean on 1/8 twist, maybe even 1/7.75 or 1/7.5 if you can.
Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? - adrenaline junkie - 12-23-2013
No offense to the grendel, but if I weren't confined by a magazine, I would do it in 260. I have an encore in 7mm08 that I bought before the 260 was around, and it doesn't kick bad with 140's, I think a 260 with a 120, 129, or even 140's would be even better.
Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? - GregP42 - 12-23-2013
adrenaline junkie Wrote:No offense to the grendel, but if I weren't confined by a magazine, I would do it in 260. I have an encore in 7mm08 that I bought before the 260 was around, and it doesn't kick bad with 140's, I think a 260 with a 120, 129, or even 140's would be even better.
I admit that a 260 might be better, but one I want a Grendel, and two on the Contender/G2 frame you could not do a 260 because of head thrust and pressure issues. And if I had an Encore I would just build another 6.5-284. I like the Grendel just fine and for a pistol I think the 260 would not have any advantage over the Grendel.
Greg
Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? - GregP42 - 12-23-2013
LRRPF52 Wrote:For a 15" barrel, I would also lean on 1/8 twist, maybe even 1/7.75 or 1/7.5 if you can.
When I talked to Missy Friday she said they only had 1in8" or 1in9" twists. I will go with the 1in8" when I call her back. She told me that it should only be 5 to 6 weeks if I order after Christmas. The other thing she told me when I asked is that they mostly use Green Mountain barrels. Now I have never had an issue with GM barrels on any of my BPCR guns or my muzzle loaders so I hope it all turns out good.
Greg
Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? - hm2 clark - 12-24-2013
What kinda scope are you gonna put on it?
Anyone use a 6.5mm (Grendel or otherwise) in a TC Encore? - GregP42 - 01-07-2014
hm2 clark Wrote:What kinda scope are you gonna put on it?
I have a Burris 2-7 pistol scope with the graduations on lower staff. It is on my .223 T/C right now, but I have an older Nikon I am going to move to that one.
Greg