+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Photo Gallery (https://65grendel.com/forumdisplay.php?fid=16)
+--- Thread: pics of new grendel finally (/showthread.php?tid=4306)
pics of new grendel finally - ricsmall - 12-20-2012
Guys, I finally got time after working bugs out of my build to post pics. Description as follows, please express your likes and dislikes.
Upper assembly:
DPMS lo-pro upper milled for side charger
Templar customs 22" bartlein barrel w/AA bolt
PRI brake
DTI BCG modified for side charger
YHM Todd Jarrett rifle length handguard
PRI adjustable gas block
Leupold Mark 2 Mounting system
Leupold mark 4 LRM1 8.5-25x50
Lower assembly:
Aero precision lower
DPMS LPK with worked trigger
CAA G27 grip
Magpul PRS and MOE trigger guard
ASC 26 round mag cut to 16 round(thanks sneaky)
I have a Jard adjustable trigger on the way
Well, first time posting pics anywhere, hope the links work, if not, Ill need guidance.
1st and 3rd pics are 3 shots at 200, 2nd pic 5 shots at 100, 4th pic 4 shots at 100. 5 and 6 are the beast! All those groups were before I had the rifle functioning properly (single shot mode), so maybe Ill be able to really focus on shooting now instead of working on it!
BTW, thanks to everyone on here for the advice and guidance so far, as I start loading for it, Ill need some more guidance.
pics of new grendel finally - bobke - 12-20-2012
Ric
Really nice build. How's it shooting?
pics of new grendel finally - ricsmall - 12-20-2012
Shooting less than moa at 200, moa or less at 100. Haven't had much time to shoot with quail season in and took some time to get the bugs worked out. Hope to shoot more soon though. Seems to have a fairly long throat though so I may be limited on projo choice. I ordered 200 123gr smk's and it looks like about 2.38 to the lands so I may try some of those and if it doesn't work out try something else, so suggestions from the more grendel savvy are much welcomed! BTW I think I loaded some pics of groups in my links, if they aren't working, ill try again.thanks for looking.
pics of new grendel finally - Taylormade - 12-20-2012
Freakin awesome gun,love that handguard can't wait to get mine. How do you like that PRI as far as loudness and possible blow back.
pics of new grendel finally - ricsmall - 12-20-2012
Thanks taylormade
the pri actually seems quieter than a yhm I had on a 5.56. Also, there isn't any blowback to the shooter, pretty good behind the shooter though.
pics of new grendel finally - Taylormade - 12-20-2012
Good to know that's the same break I was wanting.
pics of new grendel finally - Whelenon - 12-20-2012
Damn nice rifle. Have fun with it.
pics of new grendel finally - Buster - 12-22-2012
Nice!!! Glad you finally got that Templar barrel in.
You're a better man than I am...
Roll Tide..
pics of new grendel finally - ricsmall - 12-22-2012
Buster Wrote:Nice!!! Glad you finally got that Templar barrel in.Thanks buster, it was a long wait but it looks like its gonna be worth it -time will tell.
You're a better man than I am...
Roll Tide..
Roll tide!
pics of new grendel finally - bobke - 12-22-2012
Ric-
As you and I have the same, long throated barrel, you might try loading to just short of absolute mag length. I went that route yesterday with better results. Loaded 123SST and AMax to 2.285" in ASC and AA 10 round mags, and might be able to press to 2.29, but noses are getting close and backed off a bit to avoid damage. And not that I'm going to go that way, but 120 AMax would seat at 2.30", so I can now comfortably dispose of them. From my numbers gathering so far, and depending on specific ogive, I'm figuring I'm .080-.120 longer than either my Satern or AA barrel's throats. Not sure just yet, but feel like this barrel will require special attention to OAL to really nail it. Interested to see your progress.
pics of new grendel finally - ricsmall - 12-22-2012
Bob
Thanks for the info. I loaded a dummy round with the 123SMK at 2.298 OAL and that will work in my mags, though I dont want to have hunting rounds that long for fear of a malf. It will probably be couple of weeks at least before I can do much testing, Btw, how is the accuracy on yours looking?
Thanks
Richard