+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Troubleshooting (https://65grendel.com/forumdisplay.php?fid=15)
+--- Thread: Break in ??? (/showthread.php?tid=3921)
Break in ??? - hill.brandonj - 10-20-2012
Okay so now I have my gun done. New narrel from mr a himself. I run 15 rounds am nothing as far as cleaning. What is proper schedule on this new barrel?? I read one post a out shoot/clean/shoot/clean. I
Break in ??? - LR1955 - 10-20-2012
hill.brandonj Wrote:Okay so now I have my gun done. New narrel from mr a himself. I run 15 rounds am nothing as far as cleaning. What is proper schedule on this new barrel?? I read one post a out shoot/clean/shoot/clean. I
BH:
Clean it as you would any other barrel. No need to break in a barrel unless the barrel maker failed to give you a finished barrel. If you want to, go ahead but it won't make the barrel shoot better or last longer. And, there is no single process better than any other. All of them waste money and time.
Use the rifle and clean when you think it is needed.
LR1955
Break in ??? - hill.brandonj - 10-20-2012
Cool. Man I'm glad to her that. Was fraid I was ruining the barrel. Thank you for speedy response as always. You rock
Break in ??? - kamrr4437 - 10-20-2012
I agree, just shoot it no need for break in. When i go to a range i shoot and then clean it when i get home and i am sure to put oil through it with my last couple of patches when i set it up for a long period.
Break in ??? - djkilen - 10-21-2012
depends on what its for i have several custom gun and if its for match shooting my gunsmith recommends shoot clean shoot clean shoot clean shoot 3 clean shoot 3 clean shoot 5 clean and your done....for those that dont think it makes a difference i don't no about that.....either way u will no when its all broke in when your velocity stabilizes use a chrono for that....... good luck.........shoot straight
Break in ??? - LR1955 - 10-21-2012
djkilen Wrote:depends on what its for i have several custom gun and if its for match shooting my gunsmith recommends shoot clean shoot clean shoot clean shoot 3 clean shoot 3 clean shoot 5 clean and your done....for those that dont think it makes a difference i don't no about that.....either way u will no when its all broke in when your velocity stabilizes use a chrono for that....... good luck.........shoot straight
DJ:
So, your gunsmiths are saying that 14 rounds fired with six cleanings makes a significant difference in the performance of a new barrel?
This sounds like the myth that one swipe with a bronze bore brush through a barrel equals 100 rounds of wear.
Anyway, 14 rounds of wasted money is a better option than the 50 - 100 round 'barrel break in' processes that were around fifteen or twenty years ago.
LR1955
Break in ??? - LRRPF52 - 10-21-2012
If my barrel cleaning habits were equated to child care, I'd be charged with neglect! Barrel Services would put my blasters in foster care, where disturbed shooters would clean them furiously until they were throughly damaged.
Break in ??? - Variable - 10-21-2012
LRRPF52 Wrote:If my barrel cleaning habits were equated to child care, I'd be charged with neglect! Barrel Services would put my blasters in foster care, where disturbed shooters would clean them furiously until they were throughly damaged.Does pulling an occasional bore snake through to see if there is rifling left count?
![[Image: fea15adc25a1413b9237a9e076311040.jpg]](http://i307.photobucket.com/albums/nn291/Variable556/fea15adc25a1413b9237a9e076311040.jpg)
I do use bore foam once in a while. It helps find the rifling.LOL
I don't believe in barrel break-in theories anymore either.
IF I have an accuracy or chambering issue, then I usually do a decent cleaning. Otherwise I really don't worry about anything past running a bore snake once in a while. I have JB and Sweets, but I rarely use them.I am curious about the new CFE powder though. One of these days when I get a chance I'm going to try shooting a bunch of CFE loads and see if some of the copper goes away.
![[Image: 7aabe95a639943c887835b750a29365d.jpg]](http://i307.photobucket.com/albums/nn291/Variable556/7aabe95a639943c887835b750a29365d.jpg)
Break in ??? - JDub - 10-22-2012
Variable, how much to purchase the mineral rights to your barrels? I can see the copper dripping from the bore, hehe.
Break in ??? - bwaites - 10-22-2012
Holy Smokes! Now that right there is a fine patina! We look for that on our antiques, haven't seen it in a barrel before, though!
Break in ??? - Smoke - 10-25-2012
I see a whole new line of thinking here
we can sell copper paste to apply to bullets to fill those ugly cracks and dips in the barrel .
the process will create a better seal and increase velocity and accuracy
IE: Moly, Otis lifeliner and several other products in the past
Break in ??? - Variable - 10-26-2012
Smoke Wrote:I see a whole new line of thinking herePerhaps for a small fee I could allow folks to remove the copper from my barrels and allow it to be chemically rendered for use in there own firearms. That way I could give back to the community!
we can sell copper paste to apply to bullets to fill those ugly cracks and dips in the barrel .
the process will create a better seal and increase velocity and accuracy
IE: Moly, Otis lifeliner and several other products in the past
Break in ??? - Stcode3 - 10-26-2012
I know some crack heads that will scrape that copper off with thier teeth for free.