+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Photo Gallery (https://65grendel.com/forumdisplay.php?fid=16)
+--- Thread: A New Grendel Comes to Life in the Great White North (/showthread.php?tid=3732)
A New Grendel Comes to Life in the Great White North - Canuck Shooter - 09-18-2012
[ATTACH=CONFIG]2328[/ATTACH]
Here's a look at my new Grendel:
-CNC machined solid billet 7075 aluminum ATRS matched upper and lower with ambidextrous bolt release.
-18" Lilja 3 groove stainless match grade barrel 1:8 twist, polished chamber with hand fitted bolt.
-Titanium Bolt Carrier Group
-ATRS muzzle break
-Timney match trigger
-Magpul CTR stock
-Magpul Maid grip
-Vortex PST Viper scope and rings
-Magpul backup sights
-Daniel Defence low profile gas block and Omega rail
Now to take it to the range for testing ....
Anyone have any advice they want to share with a Grendel newbie on what loads to start testing with?
A New Grendel Comes to Life in the Great White North - LRRPF52 - 09-19-2012
Welcome. Very nice blaster, and looking forward to how the Lilja spits lead. Start with the 123gr AMAX and 120gr SMK for target loads. Do you have a Grendel chamber?
For your BCG, do you mean Titanium Nitride plated?
You might also get a cantilever scope mount, as the forward ring mounted to the handguard is asking for loss of zero in most cases.
A New Grendel Comes to Life in the Great White North - Canuck Shooter - 09-19-2012
LRRPF52
Good point on the scope mount - I actually haven't mounted it permanently yet, I just threw it on for a picture, I will definetly heed your warning.
It is a spec Grendel chamber, and yes, your correct in that the BCG is Titanium Nitide plated.
I have a bunch of Hornady brass, I'd like to find some Lapua brass but some things take awhile to find up here. I have the Hornady AMax 123 grain bullets - any recommendations on the powder?
A New Grendel Comes to Life in the Great White North - LRRPF52 - 09-19-2012
What powders do you have access to up there?
A New Grendel Comes to Life in the Great White North - Whelenon - 09-19-2012
Very nice Grendel, welcome.
A New Grendel Comes to Life in the Great White North - jurassic - 09-19-2012
Really nice firearm! What is your upper and lower finished with?
A New Grendel Comes to Life in the Great White North - Canuck Shooter - 09-23-2012
Upper, Lower, barrel, and break are finsihed in cerakote.
A New Grendel Comes to Life in the Great White North - rasp65 - 09-23-2012
WTF no maple leafs? Although it looks fine without them.
A New Grendel Comes to Life in the Great White North - Canuck Shooter - 09-23-2012
LRRPF52
We have access to all the same powders up here as the US. Currently using IMR 8208.
A New Grendel Comes to Life in the Great White North - Canuck Shooter - 09-23-2012
rasp65 Wrote:WTF no maple leafs? Although it looks fine without them.
Rasp65 - if you look close you will see a maple leaf engraved on the magwell ....
A New Grendel Comes to Life in the Great White North - rasp65 - 09-23-2012
CS I see it now nice touch, and it looks fine with them.
A New Grendel Comes to Life in the Great White North - Blackrifle1 - 09-27-2012
VERY Nice Grendel!
A New Grendel Comes to Life in the Great White North - LRRPF52 - 09-27-2012
Check the reloading section of the forum. There is a ton of info there that will provide you with plenty of powders to start with. Lately, we've been impressed with the performance using Hodgon's CFE, which seems to behave almost exactly like LeveRevolution.
I like to work with .2gr increments in the Grendel, which shows a predictable velocity increase that will deviate more when you get into max pressure territory.
I'm getting ready to do my own tests with CFE this weekend.