6.5 Grendel Forum
Help Ordered wrong Bergers - Printable Version

+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Ammunition & Reloading (https://65grendel.com/forumdisplay.php?fid=10)
+--- Thread: Help Ordered wrong Bergers (/showthread.php?tid=25974)



Help Ordered wrong Bergers - Schleutj - 10-16-2023

So I went online and after searching multiple sights for the best deal I f’d up. I thought I was ordering Berger OTM HYBRID 130’s- part number 26195

I ended up apparently ordering 26506 130 vld hunting.

My fault. Don’t know how I managed it.

My question is will this load and shoot as well as the hybrid otm’s ??
Can I use the same powder load, realize I might have to adjust a bit but hoping to avoid complete rework as I only bought 300

Any info will be appreciated.


Help Ordered wrong Bergers - Harpoon1 - 10-16-2023

Schleutj Wrote:So I went online and after searching multiple sights for the best deal I f’d up. I thought I was ordering Berger OTM HYBRID 130’s- part number 26195

I ended up apparently ordering 26506 130 cold hunting.

My fault. Don’t know how I managed it.

My question is will this load and shoot as well as the hybrid otm’s ??
Can I use the same powder load, realize I might have to adjust a bit but hoping to avoid complete rework as I only bought 300

Any info will be appreciated.

I haven’t any had problems with any of the VLD Hunting Berger’s across multiple calibers. The VLD’s do get a lot whining about being harder to tune, maybe I’ve been lucky?

Load data should be the same for either bullet. Try shooting them, if they don’t work trade or sell them off.


Help Ordered wrong Bergers - grayfox - 10-16-2023

There might be a typo in your OP, 130 cold - haven't heard of those. Did you mean 130 VLD (hunting)?
If so, then in general yes, however the longer ogive and secant shape makes this a longer bullet, so might change how much has to sit down into the case volume to make your OAL for the chamber, thus possibly crimping your powder charge.
If you have mags that limit you to strictly 2.260 it could be a bit of a problem.
Some mags allow up to 2.290 even 2.295 (that I know of)...
and in a bolt action you could have even more allowed OAL...
So that's going to be the thing to check if you decide to keep them.
Being same overall weight and same mfr is in your favor.
Just check the required seating depth to see if your powder charge is still ok.
Might have to load them down a bit... but only loading/comparing will tell you.

I have some 129 ABLR's which are long, and I load them out to ~2.290", they shoot fine from my gun, not sure how accurate they are yet, but I can load and shoot them.


Help Ordered wrong Bergers - Schleutj - 10-17-2023

Yes. Stupid auto correct. I ended up with the 130 vld hunting boolit. I mainly use Elander mags and those are pretty tight at the 2.260 oal. I will have to try a couple rounds loading them and see.


Help Ordered wrong Bergers - grayfox - 10-17-2023

For more room, use the duramags, or ASC, or (I think) Cproducts as well.
The duramags have up to 2.295.


Help Ordered wrong Bergers - grayfox - 10-17-2023

ps, I hate auto-correct. It's more like auto-dumb.
If this is "AI", we're not in any trouble.


Help Ordered wrong Bergers - kmon - 10-17-2023

I think Double Naught Spy has some hog information on those bullets perhaps a google search or custom search tool would find it. I haven't hunted with the 130gr Berger OTM bullets but they are the most accurate Bullet I have shot in my bolt action Grendel. I got 500 of the OTMs from a friend and ammo manufacture before you could order the bullets.

My load for the 129gr accubonds is the same as for my OTMs and groups are about 1/4 inch larger at 100 yards but I really like the LRAB for hunting. The few times I have used Berger bullets for hunting I was not impressed.