RCBS straw mod, Grendel Style - Printable Version +- 6.5 Grendel Forum (https://65grendel.com) +-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3) +--- Forum: 6.5 Grendel Ammunition & Reloading (https://65grendel.com/forumdisplay.php?fid=10) +--- Thread: RCBS straw mod, Grendel Style (/showthread.php?tid=25768)

RCBS straw mod, Grendel Style - Zeneffect - 07-04-2023 Seems we are pretty well equipped for perfect fitment of a nicer version of the straw mod Dremel cut off or hack saw, chamfer the inside, cleanup the outside. Perfect slip fit with just enough friction to stay put but not enough that it's difficult to remove. I have this on my chargemaster supreme, and lite. Stole the idea from Eric Cortina who uses 6BR + tape. I don't like tape or residue on my stuff if I can avoid it. Grendel fits really good. I would imagine arc is the same but I don't have any arc brass and this was test ppu brass I used to play with annealing and tempilaq (so junk) RCBS straw mod, Grendel Style - Huckleberry75 - 07-04-2023 Looks great, but how does it throw? RCBS straw mod, Grendel Style - CJW - 07-04-2023 You are nothing but cutting edge Zen!!!! RCBS straw mod, Grendel Style - Zeneffect - 07-04-2023 Reduced the supreme's overthrow rate from 10% to zero in 100. Reduce the lite time by about 5 seconds average. Both increased accuracy to be closer to target... about .05gr average vs the .07 on the lite and the complete randomness from Supreme. Reference scale accuracy is within .02 and measures to .001gr to test/compare.