![]() |
|
looking for some good brass - Printable Version +- 6.5 Grendel Forum (https://65grendel.com) +-- Forum: 6.5 GRENDEL FORUM NEWS (https://65grendel.com/forumdisplay.php?fid=5) +--- Forum: Welcome New Members (https://65grendel.com/forumdisplay.php?fid=23) +--- Thread: looking for some good brass (/showthread.php?tid=24692) |
looking for some good brass - ljdavidson - 07-07-2022 dose anyone know were i can find some good quality brass? looking for some good brass - jasper2408 - 07-08-2022 ljdavidson Wrote:dose anyone know were i can find some good quality brass? Here is some Nosler brass for sale but not cheap for just 50 cases. I have ordered from them before and they are OK. https://www.precisionreloading.com/cart.php#!l=NS&i=44916 Midsouth has it too. https://www.midsouthshooterssupply.com/item/0011544916/6half-grendel-unprimed-rifle-brass-50-count looking for some good brass - VASCAR2 - 07-08-2022 Shooters Pro Shop has 123 grain Nosler Custom Competition ammo on sale. It might be cheaper to buy Nosler ammo than just buying their expensive brass. Starline released a back order for 6.5 Grendel brass a week a two ago. I suggest signing up for notification with Starline. The Starline 6.5 Grendel back order was gone in about 24 hours. If you find brass you have to act fast or it is sold out. https://www.shootersproshop.com/6-5mm-grendel-123gr-hpbt-custom-competition-match-grade-ammunition-blem.html Grafs & Son also have Nosler brass but it is even more expensive. Ive bought from Shooters Pro Shop and Grafs both are gtg. https://www.grafs.com/retail/catalog/category/categoryId/711 looking for some good brass - starlinebrass - 07-11-2022 ljdavidson Wrote:dose anyone know were i can find some good quality brass? Brownells has them in stock this morning - https://www.brownells.com/reloading/brass/rifle-brass/6-5-grendel-brass-prod118626.aspx looking for some good brass - ljdavidson - 07-15-2022 thank you all for your information. looking for some good brass - CJW - 07-16-2022 LJD, You really have to be fast on the trigger ..when you first see it buy it dont wait around. I just received 250 pcs of Starline brass .I ordered it the day it first was advertised. Our members keep an eye out for Starline and will post up when it comes available . looking for some good brass - Rivercityjeff - 07-21-2022 If you are interest in once fired...This was posted on AR15.com yesterday. https://www.ar15.com/forums/equipment-exchange/6-5-Grendel-brass-1x-fired-Hornady-and-more/175-2270406/ looking for some good brass - lazyengineer - 07-21-2022 Rivercityjeff Wrote:If you are interest in once fired...This was posted on AR15.com yesterday. https://www.ar15.com/forums/equipment-exchange/6-5-Grendel-brass-1x-fired-Hornady-and-more/175-2270406/ This. Also, don't write off 7.62x39. If you can find a large batch of same headstamp for cheap, 7.62x39 brass runs and shoots just fine in 6.5 Grendel. looking for some good brass - CJW - 07-21-2022 Didnt know that LazyE looking for some good brass - Happy2Shoot - 07-21-2022 STOP! New Starline Brass 6.5 Grendel Unprimed Bag of 100 $67 https://www.grafs.com/retail/catalog/product/productId/76460 looking for some good brass - lazyengineer - 07-21-2022 CJW Wrote:Didnt know that LazyENo problem. Just be aware it will need it's own load data (smaller case capacity). And on the first run, if not careful, a few case necks may collapse when beiing squeezed down to 6.5. Also, usually you'll need to adjust the die down a touch, to get correct headspace. But annealing, turning, etc; none of that is necessary. Just run it like it's regular brass, and you'll be fine. I've gotten some remarkable accuracy actually from 7.62x39 brass in fact - just try to match headstamp if you can. FWIW, PMC is my favorite. Though Hornady 7.62x39 brass I'm pretty sure is run on same blanks as Grendel, and it may actually have same volume even. They even make small primer 7.62x39 Hornady brass, and once you convert it, very hard to distinguish from basic Hornady grendel brass. All that said, the linked STARLINE commercial brass posted above, is obviously the easier and likely better route, now that such is available. |