+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Bolt Actions & Single Shots (https://65grendel.com/forumdisplay.php?fid=17)
+--- Thread: Stock options (/showthread.php?tid=24677)
Stock options - Six5x39 - 07-02-2022
Hi guys
I'm trying to find a stock build . . I was thinking about regular used stock from howa , but just wondering if there are better options outhere for the money . Purpose build is for out in the woods and desert and not looking for fancy or tactical build.
Stock options - Old Bob - 07-03-2022
Brownells has HTI stocks for Howa mini actions. It's the same stock that's on complete Howa rifles. I bought a Howa 6.5 Grendel Mini awhile back. The action sat at an angle in the stock. Had to remove some material from the left side of the barrel channel & then glass bed it the get the action & barrel lined-up straight in the stock. I also replaced the plastic trigger guard with an aluminum unit.
https://www.brownells.com/rifle-parts/stock-parts/rifle-stocks/howa-mini-action-stock-polymer-black-prod132972.aspx
https://www.diproductsinc.com/Detail.aspx?PROD=1371404&CAT=12462
Bell & Carlson has a stock with an aluminum bedding block for the mini action. It's a bit more expensive than the HTI but, IMHO, this would be your better option.
https://www.bellandcarlson.com/index.cfm?fuseaction=category.display&category_ID=1139
Stock options - Dinny - 07-03-2022
Pendleton Custom Stocks are strong and light. Mine weighs 18oz with steel pillars and bedding. http://www.oregunsmithingllc.com/
Thanks, Dinny
Stock options - Six5x39 - 07-04-2022
If I go with B&C stock , can I still use bottom metal plate on stock ?
Stock options - HokeyPokeyKid - 07-04-2022
Six5x39 Wrote:If I go with B&C stock , can I still use bottom metal plate on stock ?
You can use the factory bottom or any of the aftermarket options that are available.