+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8)
+--- Thread: What do you guys think of these marks on the brass? (/showthread.php?tid=24675)
What do you guys think of these marks on the brass? - Bretandry - 07-01-2022
New barrel three rounds test fire..all three show these marks and you can feel them. I am leaning to reem chatter as the possible cause. What say the masses?[ATTACH=CONFIG]18941[/ATTACH]
What do you guys think of these marks on the brass? - kmon - 07-02-2022
Small rings below the neck/shoulder little rough chamber (needs polishing) in that part, like you say chatter. Small ding there perhaps from small bur in the chamber or striking sharp spot on chambering. Does the small cut/scratch show up on a chambered then ejected round or only fired rounds?
What do you guys think of these marks on the brass? - Bretandry - 07-02-2022
It's brand new I asked for the test brass to be Hornady and sent to me with the new upper i have not fired a round through it yet. I am no chamber expert so i was hoping to get some education and not be unreasonable when dealing with the builder. I am kinda leaning to the barrel should be replaced or repaired
What do you guys think of these marks on the brass? - Former Cav - 08-19-2022
I HAD a BCA barrel that had a cut mark (tool mark) in the chamber and it would occasionally cause a failure to extract. I got rid of it and replaced it with a Krieger barrel. Interesting that the groups did NOT improve much. I wrote BCA about it but they never replied. Guess you can't expect much for a cheap bottom tier builder. Course I was about 1 year after purchase due to the HOT weather in Phoenix.
What do you guys think of these marks on the brass? - ported45 - 08-22-2022
Former Cav Wrote:I HAD a BCA barrel that had a cut mark (tool mark) in the chamber and it would occasionally cause a failure to extract. I got rid of it and replaced it with a Krieger barrel. Interesting that the groups did NOT improve much. I wrote BCA about it but they never replied. Guess you can't expect much for a cheap bottom tier builder. Course I was about 1 year after purchase due to the HOT weather in Phoenix.
As far as Customer Service, I did not have any trouble with BCA. What I had trouble with was getting a throat cut to correct +/- SAAMI specs on 3 back to back uppers. When the 4th upper arrived that was in spec, then it would not do better than a 5" group at 100 yards with handloads and Hornady Black. Customer Service sent me another return label and refunded my purchase price. But I was out a lot of time, fuel, a box of Hornady Black, and some reloaded ammo. Ended up with a Hardened Arms upper for almost the same price that would produce groups that made just a ragged hole at 100 yards. I should have kept the HA upper, but got rid of it and bought a Ruger Predator bolt gun in Grendel instead. I love the round, but I'm just more of a bolt gunner than semi-auto; even in a .22 lr.
What do you guys think of these marks on the brass? - LRRPF52 - 08-22-2022
As soon as I saw them and looked at the rough marks, I thought BCA without even reading the comments.
What do you guys think of these marks on the brass? - Jimla - 08-22-2022
ported45 Wrote:As far as Customer Service, I did not have any trouble with BCA. What I had trouble with was getting a throat cut to correct +/- SAAMI specs on 3 back to back uppers. When the 4th upper arrived that was in spec, then it would not do better than a 5" group at 100 yards with handloads and Hornady Black. Customer Service sent me another return label and refunded my purchase price. But I was out a lot of time, fuel, a box of Hornady Black, and some reloaded ammo. Ended up with a Hardened Arms upper for almost the same price that would produce groups that made just a ragged hole at 100 yards. I should have kept the HA upper, but got rid of it and bought a Ruger Predator bolt gun in Grendel instead. I love the round, but I'm just more of a bolt gunner than semi-auto; even in a .22 lr.
I had the exact same problem, I had to return 3. Maybe they gave us the same uppers.
What do you guys think of these marks on the brass? - CJW - 08-22-2022
I have only had one BCA bbl, a .223 it was a big mistake .
BCA did make me 100% whole and did it without one bit of hassle.
You live and learn on this site .
What do you guys think of these marks on the brass? - ported45 - 08-23-2022
Jimla Wrote:I had the exact same problem, I had to return 3. Maybe they gave us the same uppers.
Maybe sent me yours and sent you mine!!
I told them exactly what the trouble was with the throat length on them and to please check to make sure it was within tolerance before sending the replacement, but alas ...
What do you guys think of these marks on the brass? - Jimla - 08-23-2022
ported45 Wrote:Maybe sent me yours and sent you mine!!
I told them exactly what the trouble was with the throat length on them and to please check to make sure it was within tolerance before sending the replacement, but alas ...
I told them the same thing. On the returns it took 1-2 months of waiting, each replacement was worse than the earlier one.
https://www.65grendel.com/forum/showthread.php?19570-18-quot-Bear-Creek-Arsenal-6-5-Grendel-Upper-Range-Result&highlight=BCA+chamber