+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: GENERAL FIREARMS DISCUSSION (https://65grendel.com/forumdisplay.php?fid=38)
+--- Forum: Cartridges (https://65grendel.com/forumdisplay.php?fid=18)
+--- Thread: Recommendations for 6mm Arc reamer? (/showthread.php?tid=23981)
Recommendations for 6mm Arc reamer? - SDguy - 11-26-2021
Like the title says I am looking for recommendations for 6mm Arc reamer? Not sure How extensive my use may or may not be. this will be my first attempt at chambering a barrel & just intend on working with a take off barrel to start my learning curve. I have a deep machining background though my gunsmithing Experience is near non existent.
Thank you in advance for your input.
Recommendations for 6mm Arc reamer? - VASCAR2 - 11-27-2021
Id contact Manson Reamers. Ive read to many negative reports on PTG.
Manson doesnt show the 6 ARC in their 2020 catalog but might still sell you what you need.
https://mansonreamers.com/
Recommendations for 6mm Arc reamer? - Old Bob - 11-27-2021
I ordered 6mm ARC Headspace gauges from Manson, so I assume they would have reamers for that chamber as well. The 6mm ARC headspace gauges weren't in their catalog either but they do have them. They haven't updated their catalog in awhile. You'll have to call them 'cause they don't sell their products via the internet. Page 3 of their catalog has ordering information.
Recommendations for 6mm Arc reamer? - Tx264 - 12-01-2021
Vassar,thanks for the link to Manson.