+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Build-It-Yourself & Custom Builds (https://65grendel.com/forumdisplay.php?fid=9)
+--- Thread: 2 issues , trigger reset and first round feed (/showthread.php?tid=23585)
2 issues , trigger reset and first round feed - Stovestoker - 07-29-2021
Still tweaking my new build. First issue is when i go to charge the weapon it seems like the bolt is slipping ovwr the top of the round. I leaves a crease where it has skipped over the top. I drop the mag and reseat it. It then will strip the round
Second, i have a drop in cnc 2.5 pound trigger. The trigger will not reset without me nudging it forward manually. Any ides?
2 issues , trigger reset and first round feed - RobertFL - 07-29-2021
I had the same issue with a New trigger. My trigger was rubbing on the side of the "trigger hole". I first cleaned and lubed the trigger then I polished the inside of the trigger hole where trigger was rubbing. No problems with trigger reset after I gave it a little more room, I used some 1200 grit sand paper on a popsicle stick to polish/remove a little bit of the finish inside of the trigger hole.