build #6 6mm Arc 12" - Printable Version +- 6.5 Grendel Forum (https://65grendel.com) +-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3) +--- Forum: 6.5 Grendel Build-It-Yourself & Custom Builds (https://65grendel.com/forumdisplay.php?fid=9) +--- Thread: build #6 6mm Arc 12" (/showthread.php?tid=23233)

build #6 6mm Arc 12" - mel - 04-26-2021 since some parts are starting to come in figured id post the next build doing this one on a polymer lower , no billet upper this time going to be a monster 12 6 arc build , with a 12inch hq and kaw valleycomp , low mass bcg , 2.5# drop in trigger still not sure what brace is going to go on this one maybe yet and being topped off with a sig whiskey3 2-7x32 this one is getting sent out for a wild cerakote job after its together i have just about all the pieces except the brace and barrel here for it build #6 6mm Arc 12" - mel - 05-16-2021 barrel, handquard, gas block, gas tube, bolt all on the way should have it all by wensday , going on my registered lower for the time being build #6 6mm Arc 12" - danm - 05-17-2021 Right on, can't wait to see 12" ARC ballistics build #6 6mm Arc 12" - mel - 05-19-2021 the other parts are delayed a day for some reason build #6 6mm Arc 12" - mel - 05-24-2021 had just enough time to start mocking it up to check everything out