6.5 Grendel Forum
Cleaning chamber after steel case? - Printable Version

+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Troubleshooting (https://65grendel.com/forumdisplay.php?fid=15)
+--- Thread: Cleaning chamber after steel case? (/showthread.php?tid=22988)



Cleaning chamber after steel case? - sqeezeatrigger - 03-01-2021

Anyone have sticky chamber after firing steel case ammo? I haven't had a problem yet but want advice just in case. Not shooting grendel as much now, have decent supply of ammo but if it can't be replaced I will shoot other caliber. Glad I have beaucoup 22lr!


Cleaning chamber after steel case? - A5BLASTER - 03-01-2021

Clean it out bout every 400 rounds and it will never be a problem.


Cleaning chamber after steel case? - lazyengineer - 03-01-2021

I just run a few brass cased rounds at the end of my session. Works for me.

Apparently the issue is the gunk that builds in the chamber, has a greater affinity for brass, than it does for the coated steel from whence it came. So, if that's the case, running a few brass casings while it's still warm and fresh, and doing so as the last few rounds at the end of a session, is a nice way to clean that out under controlled and non-urgent conditions.

Works good for me at least - I never have a problem with Grendel and steel. But then, I also reload, so running a few 7.62X39 to 6.5 Grendel fireforming shots at the end of the session is a pretty low-cost fun-shooting thing to do. If you don't reload, and are having to do that with $2/shot factory priced ammo; that's probably less attractive.


Cleaning chamber after steel case? - VASCAR2 - 03-02-2021

I use this chamber brush and it does a good job.

https://www.ar15buildbox.com/shop/Cleaning-Products.htm


Cleaning chamber after steel case? - Old_School - 03-08-2021

sqeezeatrigger Wrote:Anyone have sticky chamber after firing steel case ammo? I haven't had a problem yet but want advice just in case. Not shooting grendel as much now, have decent supply of ammo but if it can't be replaced I will shoot other caliber. Glad I have beaucoup 22lr!

I always had that problem shooting Wolf steel cased .223 ammo in my S&W AR. It got better over time as the barrel broke in, but if I came home and didn't clean the barrel and chamber after a shooting session, the next time at the range, both steel & brass-cased ammo would stick and many would have the rim ripped off. To solve that, I would take a chamber brush and Hoppes and spin the brush in the chamber for 2-3 seconds at low speed using a cordless drill. Never had another issue after that.