6.5 Grendel Forum
Howa Ultralight Build - Printable Version

+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Bolt Actions & Single Shots (https://65grendel.com/forumdisplay.php?fid=17)
+--- Thread: Howa Ultralight Build (/showthread.php?tid=22638)



Howa Ultralight Build - Stinky Coyote - 01-06-2021

Log: Got the action back from smith, a 22" cut down to 18.5" and i had previously had 3oz removed from action/bolt so here's actual weights now except the stock/hinged floor plate where the weights were given by Dinny for the stock and Oregun for the bottom metal.

53 oz barreled action 18.5" barrel - slabbed/fluted action/bolt (3 lb 5 oz) confirmed 3 lb 4.5 oz without action screws (jan 6)
18 oz pendelton stock (ordering today)
3.5 oz oregun hinged floor bottom metal kit (ordering today with stock)
= 74.5 oz or 4.65 lbs bare rifle

2.0 oz talley 1" low rings
9.75 oz leupold fxII 4x33 with 33mm alumina flip cap on objective

= grand total scoped rifle at 86.25 oz or 5.4 lbs

i know 5 rounds ammo is 3 oz, so a 9 round shell holder with 9 rounds should be about 6 oz, and my 1" slings are 2.5 oz, that would put it going down the trail with 9 rounds and sling at 94.75 oz or 5.92 lbs...not bad, and should be just under 36” long oal.

It may take awhile to get the stock/parts imported to Canada but the process is started. Will drag this up from the dead when i have more info.


Howa Ultralight Build - biodsl - 01-06-2021

Looking forward to this. You and Dinny are killing it!


Howa Ultralight Build - bowhunter - 01-07-2021

Look forward to seeing it. I didnt touch the barreled action on my 20 inch lightweight mini and it comes in at 5.56 lbs all set up with a Pendleton stock, DIP bottom metal, and vx2 scope.


Howa Ultralight Build - Stinky Coyote - 01-07-2021

you got some pics somewhere? sounds excellent


Howa Ultralight Build - s3silver - 01-08-2021

Sweet. Looks like it’ll be a joy to carry.


Howa Ultralight Build - bowhunter - 01-08-2021

Stinky, I don't remember how to attach photos so ill just copy and paste this link http://www.65grendel.com/forum/showthread.php?17969-Another-lightweight-grendel

A buddy of mine has one very similar, just in a different color. I'm not sure if you have to but we had to send our barreled actions into Wayne to have the stocks made.


Howa Ultralight Build - Dinny - 01-10-2021

Wayne is building them now for a drop in fit. I still glassed mine although it doesn't seem it did anything for accuracy. It shoots just the same now due to the loose nut behind the trigger.

Thanks, Dinny


Howa Ultralight Build - Stinky Coyote - 01-11-2021

bowhunter Wrote:Stinky, I don't remember how to attach photos so ill just copy and paste this link http://www.65grendel.com/forum/showthread.php?17969-Another-lightweight-grendel

A buddy of mine has one very similar, just in a different color. I'm not sure if you have to but we had to send our barreled actions into Wayne to have the stocks made.

thank you, looks great!


Howa Ultralight Build - bowhunter - 01-13-2021

Thanks! I bet your build is going to be a sweet little unit as well!