+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Build-It-Yourself & Custom Builds (https://65grendel.com/forumdisplay.php?fid=9)
+--- Thread: Carrier from Toolcraft + Bolt from JP: slides down vertically (/showthread.php?tid=22389)
Carrier from Toolcraft + Bolt from JP: slides down vertically - R2BRO - 11-25-2020
OK so I did measure the bolts of JP and Toolcraft to be within 2 mils.
I am now using carrier from Toolcraft and inserting a bolt from JP there for 6.5G build.
one thing that immediately bothered me is: after I assembled the BCG, when i fully retract it and then place vertically face down, it slides back under own weight.
is it a problem or not?
If I am correct I heard that if that happens then its time to change bolt rings... but this is brand new bolt.. any ideas if i should ignore it and all good, or ?
Carrier from Toolcraft + Bolt from JP: slides down vertically - A5BLASTER - 11-25-2020
Not a problem. Drop it in the gun and go enjoy your new grendel.
Carrier from Toolcraft + Bolt from JP: slides down vertically - R2BRO - 11-25-2020
yay thanks
Carrier from Toolcraft + Bolt from JP: slides down vertically - StoneHendge - 11-25-2020
That's what JP bolts do. If you take a look, they use a different ring system.