+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Troubleshooting (https://65grendel.com/forumdisplay.php?fid=15)
+--- Thread: What NOT to do. (/showthread.php?tid=21387)
What NOT to do. - Mad Charlie - 06-05-2020
https://www.youtube.com/watch?v=LQZqSYnPJYM&feature=youtu.be
Was drifting around on YT and stumbled on this.
What NOT to do. - imaguy3 - 06-05-2020
looks good to me
What NOT to do. - Cowdog - 06-05-2020
So that is how you finish a 80% lower. With JB weld. And a pink rattle can.
What NOT to do. - RobertFL - 06-05-2020
He said he used a "sticker jig"... I looked it up and it is stickers that cost $4. Maybe he will get the proper drill jig and bits for the next 80% project. I'm sure he will do better on the next one. I had thought about getting a few 80% lowers for myself but ended up buying 3 lowers from a local manufacture after watching a few YouTube videos.
What NOT to do. - southpaw - 06-05-2020
A "sticker jig", now that's some precision tooling. I've finished six 80% lowers and have two more I plan to finish when I get inspired to do new builds. They all function as they should, but the first two needed some "minor adjustment". It's not that difficult to do with a good jig and having a drill press also helps. However these cost more than $4.00.
What NOT to do. - stubshaft - 06-07-2020
The color suits him. He has got to be an eggspurt!
What NOT to do. - FLshooter - 06-07-2020
I couldnt even finish the video. Idiot hack job.If I were him ,I wouldve been embarrassed to post the video.Before I ever attempted to finish an 80% lower I watch videos and I went to a friend of mines house and watched him do a few.
I Purchased a jig online that I use with my router. I believe it cost around $200.All my 80% lowers work perfectly and look just like any AR lower. In fact Ive had most of them laser engraved and either anodized or cerakoted.
I have built a few A.R. 15s with 80% lowers. But I felt it was a hassle. It cost me less to buy a complete lower from PSA. I dont see a big advantage. Im not worried about anyone taking anything I own either way.
What NOT to do. - Mad Charlie - 06-07-2020
I think he posted it because he wanted someone to help him "fix" it. Does JB weld even stick to polymer worth a dam?
Dull tooling just melted that plastic crap. "But it looked easy on you tube"
I am a 45 year machinist, with Bridgeport, lathe, surface grinder, etc. I have done one 80% and it was perfect when finished, but I agree that it is more trouble than it was worth, and less expensive in time and money just to buy a decent lower.
That kind of workmanship on a rifle purely makes me sick.
Maybe if he gets a few more poly lowers and practices a lot, he might be able to make a serviceable unit, but not that one.
Somehow, I don't think he was looking for a challenge, he just wanted a ghost rifle, Cheep!
What NOT to do. - Bronz - 06-08-2020
Yeah sure go with an 80% lower when you want 50% reliability or in this guys lower zero percent reliability
What NOT to do. - FLshooter - 06-13-2020
Bronz Wrote:Yeah sure go with an 80% lower when you want 50% reliability or in this guys lower zero percent reliabilityThe idiot in the video used a sticker to mark where he was going to drill the holes. If you spend $175 and buy a jig,and use a router or drill press, Your lower will look factory when youre done. mine all work 100% of the time.
Ive got one that I had laser engraved Mattelon it.And its Keracoted in orange with white logo . Did the hand guard and buffer tube too. A shooting acquaintance at the club likes it so much Hes offered me $1000 for the complete lower. But Ill never do that. $500 is in the Geissele NM trigger and butt stock alone.
What NOT to do. - Kswhitetails - 06-13-2020
I want mine to be yellow and say "TONKA" on it.
What NOT to do. - mel - 06-13-2020
my 20 inch grendel is on an 80% lower no problems what so ever, i bought mine to replace an oem lower i had it on well mainly cause a skelotonized lower isnt cheap lol and it was something to kill time with lol
What NOT to do. - JTB - 06-20-2020
I hope he cut that thing up or melted down or something. I never in my life lol