![]() |
|
Does anyone make AR magazine conversions for Howa Mini? - Printable Version +- 6.5 Grendel Forum (https://65grendel.com) +-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3) +--- Forum: 6.5 Grendel Bolt Actions & Single Shots (https://65grendel.com/forumdisplay.php?fid=17) +--- Thread: Does anyone make AR magazine conversions for Howa Mini? (/showthread.php?tid=21319) |
Does anyone make AR magazine conversions for Howa Mini? - Stinky Coyote - 05-26-2020 And if not, why not? Does anyone make AR magazine conversions for Howa Mini? - VASCAR2 - 05-26-2020 Not that Ive ever read. Ive read you can use some stocks that use AICS mags but there havent been many threads on their use. Most forum members who want a bolt action which use AR-15 magazines buy the Ruger in 6.5 Grendel. Does anyone make AR magazine conversions for Howa Mini? - HokeyPokeyKid - 05-26-2020 I set out to design a bottom metal that used AR15 magazines but quickly discovered that the magazine is too wide to fit up into the action high enough to feed. There is a company in Australia that makes one but you have to send your rifle in for modification to allow the magazines to fit in place. Does anyone make AR magazine conversions for Howa Mini? - tdbru - 05-26-2020 what HPK said. if you take the howa barreled action out of the stock and flip it over, and then hold up an AR magazine to the action, you'll see that the magazine is wider than the opening in the action on the bottom. so you'd have to get the action milled out to accept the AR mag. i suspect this is what the company in Australia is doing. -tdbru Does anyone make AR magazine conversions for Howa Mini? - Stinky Coyote - 05-26-2020 I have a very talented machinest that could figure it out pretty easy, would just need the other bits i suspect. Lots to love about the howa but equally so for hate on the magazine system. Does anyone make AR magazine conversions for Howa Mini? - Rosecrans1 - 05-26-2020 The AR mag will limit your OAL but I know they are plentiful and cheap verses the Howa Grendel magazines which are sometimes scarce and always mucho dinero! There is only one thing more scarce and priceless! Ready?.............................................. Wait for it!!!! Amend2 Polymer 6.5 Grendel magazines!!! Estimated to ship within 6-10 months.....or years...........decades? (sorry for the Hijack but I couldn't help myself!!!) Does anyone make AR magazine conversions for Howa Mini? - jmkhenka - 06-03-2020 All howa mini after factory stocks use the stock magazine for grendel. Its center feed and most AR magazines are double stacked, so unless you modify the feed ramp, you cant use double stack magazines. Does anyone make AR magazine conversions for Howa Mini? - Stinky Coyote - 06-08-2020 Talked to the outfit in Australia and no luck getting there stuff here. Maybe someone here will make kits? Does anyone make AR magazine conversions for Howa Mini? - Bronz - 06-08-2020 Agreed not fond of plastic mags. The Howa action is a little is a little weeks too. Does anyone make AR magazine conversions for Howa Mini? - A5BLASTER - 06-08-2020 Bronz Wrote:Agreed not fond of plastic mags. The Howa action is a little is a little weeks too. How is the howa action "weak"? |