+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8)
+--- Thread: Looking for a hand guard in FDE (/showthread.php?tid=21263)
Looking for a hand guard in FDE - Hayden9801 - 05-18-2020
Curious if anyone happen to have a hand guard and barrel nut in Magpul FDE they'd be willing to sell. Wanting one about 13" or so. Can't have the anti rotation tabs. Thanks in advance for any help!
Looking for a hand guard in FDE - imaguy3 - 05-18-2020
I might be willing to sell my keymod one... I'd have to see if I can find a suitable replacement for mine first though lol
Looking for a hand guard in FDE - Old Bob - 05-18-2020
Slim pickin's for FDE 13" handguards. I did find some though. One UTG at JSE surplus & two Stoner handguards at Midway USA. Every other place I looked, these handguards were out-of-stock or on back-order. I have no personal experience with any of these so I can't endorse them.
http://www.jsesurplus.com/utgproar1513superslimfreefloathandguard-fdecerakote.aspx
https://www.midwayusa.com/product/1020691635?pid=436188
https://www.midwayusa.com/product/1020691635?pid=506298
Looking for a hand guard in FDE - 1075 tech - 05-18-2020
Guntec 12". No tabs. I have the Air Lite in 10" https://guntecusa.com/product-category/ar-15/ar-15-m-lok-handguards/?filter_handguard-length=12-handguard&filter_color=flat-dark-earth
AT3 12". You could cut the tabs off. I have a couple of these. Pretty slim. My SLR 7 barely clears. https://www.at3tactical.com/products/at3-spear-m-lok-ar-15-free-float-handguard-12-15-lengths
Looking for a hand guard in FDE - drewthebrave - 05-18-2020
It's not FDE, but I like the ALG EMR handguards in the Desert Dirt color, which varies from batch to batch. You may need to grind down the anti rotation tabs though. I did it with a hand file to fit a billet receiver, and it took less than 15 minutes going a little bit at a time.
Looking for a hand guard in FDE - Hayden9801 - 05-26-2020
Thanks guys for the help. I also had already ground down those before I installed the .