6.5 Grendel Forum
magazines for 22 Grendel and improved ? - Printable Version

+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: GENERAL FIREARMS DISCUSSION (https://65grendel.com/forumdisplay.php?fid=38)
+--- Forum: Cartridges (https://65grendel.com/forumdisplay.php?fid=18)
+--- Thread: magazines for 22 Grendel and improved ? (/showthread.php?tid=21101)

magazines for 22 Grendel and improved ? - Westex - 04-24-2020

who magazine works the best and smoothest ?

magazines for 22 Grendel and improved ? - A5BLASTER - 04-24-2020

I would think the cpd/duramags is going to be your best route.

For me they have been the best metal grendel mags. Elanders just plan suck, period.

Asc/arstoner aren't too bad, they need the very front lip of the mag taken down a lil bit.

The CPD/duramags have been great straight from the packaging. I have got a few I had to tweak a feed lip because it got bent during shipping but other then that they have been the best of the metal grendel mags.

magazines for 22 Grendel and improved ? - windsage - 04-24-2020

For the 22 Grendel I just used the 6.5 Grendel E-Lander mags that I already had. On every one of those I had to lower the front edge of the mag a bit and tweak the lips to get them to feed correctly with the 6.5. When I then tried the 22, they worked fine.

magazines for 22 Grendel and improved ? - Es 350 - 04-25-2020

I use the 10 and 15 rd 6.5 ASC mags for 22 IMP.
2 of the 10 or so i have needed the lips modified a touch to get to feed smoothly, others worked fine as delivered.

magazines for 22 Grendel and improved ? - ricsmall - 04-25-2020

Es 350 Wrote:I use the 10 and 15 rd 6.5 ASC mags for 22 IMP.
2 of the 10 or so i have needed the lips modified a touch to get to feed smoothly, others worked fine as delivered.

+1. This is the only brand mag I’ve used since getting into the Grendel way back when. Never had any problems with em

magazines for 22 Grendel and improved ? - Caleb - 05-06-2020

ricsmall Wrote:+1. This is the only brand mag I’ve used since getting into the Grendel way back when. Never had any problems with em

Same here, acs has worked flawlessly for me 10 and 15 round