![]() |
|
First Grendel Build=Elation - Printable Version +- 6.5 Grendel Forum (https://65grendel.com) +-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3) +--- Forum: 6.5 Grendel Photo Gallery (https://65grendel.com/forumdisplay.php?fid=16) +--- Thread: First Grendel Build=Elation (/showthread.php?tid=2102) |
First Grendel Build=Elation - samalama76 - 01-31-2012 Hello all, I am still not finished yet and I would love some feedback on what I may need or tweak. I have a VLTOR ModPod on the way, and some extra picatinny rails(3" and 15"), so the one shown will be replaced soon. SPECS
I know that you fellows are going to say why a Barska scope? I honestly have nothing but good things to say about this scope and I have had/have some nicer ones. It is serving my purposes fine right now and I will upgrade when I get some extra coin freed up. I am thinking about a WoTac 10 x 44 Gen 5 Mil/Mil. Thanks and feedback is appreciated! First Grendel Build=Elation - taggor - 01-31-2012 Looks good! The only feedback I could give you is to build what you want to build! If this set up works for you then that should be enough. Some other forums are a bit more harsh with "correct clone builds" (of military style rifles) and other related bull s@#$ but, since the Grendel doesn't have any "clones" you don't have to suffer through that. Just have fun with the build and if you don't like the first build.... build another one! First Grendel Build=Elation - Whelenon - 01-31-2012 What's important is, does the scope shoots and performs to your satisfaction. Nice Build. First Grendel Build=Elation - mwilkins - 01-31-2012 Nice rig. Would expect a range report before long..... First Grendel Build=Elation - LRRPF52 - 02-01-2012 What's your impression of the BHW barrel? How long did it take to get the barrel? Looking forward to seeing some groups, so I hope the Barska holds zero enough for at least one range session so we can see the accuracy potential of the BHW. What loads do you plan on trying? First Grendel Build=Elation - dvrod18 - 02-01-2012 LRRPF52 Wrote:What's your impression of the BHW barrel? How long did it take to get the barrel? Looking forward to seeing some groups, so I hope the Barska holds zero enough for at least one range session so we can see the accuracy potential of the BHW. What loads do you plan on trying? +1 Nice looking build for sure! First Grendel Build=Elation - samalama76 - 02-01-2012 I am very impressed with the barrel so far, the finish is top notch, I like it is threaded in 5/8 x 24, the chamber is supper smooth, feed ramps are fairly smooth and line up perfectly. I can't wait to shoot it, I feel like it is going to be amazingly accurate but we will see. It took less than a month to get the barrel in my hands. I am also looking forward to putting that Barska to the test as well. I will definitely report back with groups, scope performance and everything else I can. I am going to break it in with factory ammo, probably Wolf MPT 120gr and Hornaday 123gr A-Max. I am trying to get to the range this weekend, but I have 3 builds I'm doing now for other people and I really want to get them done asap so it may be next weekend before I can hit the bench. As far as load development I am starting with Nosler 100gr Ballistic tip Spitzers and Nosler custom comp 123gr HPBT's. As for powder I am using TAC and BL-C(2) and see where they take me. If anyone has any suggestions as far as loads are concerned I would love any input. I am really planning on just starting from scratch and really doing some true load development with this caliber/platform. Excited! First Grendel Build=Elation - txgunner00 - 02-01-2012 Nice. Good luck. |