+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Ammunition & Reloading (https://65grendel.com/forumdisplay.php?fid=10)
+--- Thread: 123 sst vs 123 eldm (/showthread.php?tid=20817)
123 sst vs 123 eldm - JCSC - 03-13-2020
How is the Ogive on the sst bullets? With the 123 eldm I am around .050-.060 from the lands and mag is the restriction.
Havent played with these aside from a box of factory ammo.
123 sst vs 123 eldm - FloorPoor - 03-15-2020
If you're shooting paper, the ELD is better. If you're hunting, SST.
123 sst vs 123 eldm - nuthead - 03-16-2020
I think in the 123grainers the eld-m and the sst's are identical other than the band crimped around the sst to hold it together a bit longer.
The eld-m's have always been more accurate for me FWIW
123 sst vs 123 eldm - Rosecrans1 - 03-16-2020
I have the same thoughts as "nuthead". The SST isn't as accurate in my AR or bolt gun as the ELD-M in 123 grain. But.as a hunting bullet, it doesn't necessarily have to be.
123 sst vs 123 eldm - FLshooter - 03-16-2020
Ive used both bullets for target practice.The ballistic coefficient is close SST .485. ELD .505. Both bullets are equally accurate in my barrels.Both take different loads.Both like a 1 mm jump ,which is .040 inches. Only difference is the super shock tip, which is made for expansion for hunting.
123 sst vs 123 eldm - JCSC - 03-16-2020
Thank you. Thats what I was looking for. I have had so so accuracy with the Eldm. Probably 1-1/4-1-1/2 groups on average and I wondered if they had a different profile.
With my chamber and AR mag, I cant get very close to the lands with eldm, so it may not benefit for me to try the SST, although it would be a good hunting option and my accuracy would be acceptable for a hunting situation.
123 sst vs 123 eldm - FLshooter - 03-16-2020
What is your COL?
Between 2.250-2.260 is what I seat to. Fits in ASC mags.And very accurate.
123 sst vs 123 eldm - JCSC - 03-17-2020
2.260 puts me .05 away from the lands.
123 sst vs 123 eldm - gwtx - 03-17-2020
Quote: "2.260 puts me .05 away from the lands."
I load 123 SST's like FLshooter(2.250-2.255). I use the "base to ogive" measurement since the oal varies a few thousandths.
When I measure with the SST, I get 2.262-2.265, so I'm loading .010" off the lands. Apparently my chamber is on the short side of the saami spec, but, it shoots whatever I feed it, even the Wolf steel shoots pretty good. I just loaded some ELD's to try. Don't have much info on them yet. I only shoot hogs and sometimes other varmints, so I don't 'have' to have sub moa accuracy, but I get it with my loads. Just passing on info, no brag. Good luck
123 sst vs 123 eldm - Cornbread - 03-18-2020
The ogives are different. I know I measured the bto on them but cant remember the difference off the top of my head. But I load my ssts to a shorter coal.
123 sst vs 123 eldm - LRRPF52 - 03-18-2020
SST has a different jacket material, cannelure, and mechanical lock in the base, plus a softer polymer tip.
123 sst vs 123 eldm - JCSC - 03-20-2020
Thank you. I was mainly interested in the bullet profile. If it were the same as the eldm it would not be worth me trying to load them.
I was hoping it was more of a tangent Ogive similar to the 120 eldm, which I am able to load long enough to get close to the lands.