6.5 Grendel Forum
Another new build - Printable Version

+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Photo Gallery (https://65grendel.com/forumdisplay.php?fid=16)
+--- Thread: Another new build (/showthread.php?tid=20542)



Another new build - Wethepeople - 02-02-2020

My new grendel. A hunting setup. Not sure how pic quality will be after editing resolution and file size, but here goes.


Another new build - VASCAR2 - 02-02-2020

Very nice rifle picture turned out fine.


Another new build - Wethepeople - 02-02-2020

Good. Uploading from my phone is a pain. I'm kinda bummed it's so muddy out here right now. I was hoping to shoot it some today. I can go out to 400m here at home and 2000 yards at the range. Need to chain up all 4 to get up the road to the LRP at the range and after walking out to just my 25 yard target and back this morning, I could hardly walk with 4 inches of mud on my boot soles. It was shooting 5 round ragged hole when I sighted at 100 yds a few days ago. It was short stroking then, when I remembered I'd left a heavy carbine buffer in it. Oops! Has a T2 now and expect that will solve the problem.

Now if it will just dry out or freeze again.


Another new build - ric44 - 04-26-2020

Like that one . Building a similar rifle but black . Gonna use a old school Hogue handguard with a 20" barrel and a plain A2 stock . What barrel are you using ?


Another new build - tdbru - 04-27-2020

WeThePeople,
how much does that rig weigh? what is the barrel length? looks nice by the way.
-tdbru


Another new build - FLshooter - 04-28-2020

Nice looking build.Who makes the barrel?


Another new build - Wethepeople - 05-01-2020

It's a JP barrel, picked up on sale from OP along w/ Odin brake. Bundled price was $504 + change shipped.
Not sure on weight, side by side it is no heavier than a 16" BCM Reece in the safe. Significantly lighter than 18" 5.56 DMR build w/ WOA SPR barrel.
I'll report back on exact weight, with and w/o the Vortex.


Another new build - Wethepeople - 05-01-2020

Bundled cost included JP bolt as well.


Another new build - Wethepeople - 05-01-2020

Sorry tdbru. 18" barrel. It and the brake sleeve are now Duracoated FDE also. Rattle canned camo over Duracoat base also.


Another new build - Wethepeople - 05-01-2020

tdbru, base weight w/sling and swivels is 7.18lbs. With PST 2x10 and Recon mount, 9.60lbs


Another new build - Wethepeople - 05-01-2020

In comparison to the Recce. Accessories, streamlight, mount, Cloud tape switch, B5 Soccom stock, rail covers, PA 1x8 LVPO and recon mount. 9.5lbs.


Another new build - LRRPF52 - 05-01-2020

[Image: ?u=https%3A%2F%2Fmedia.giphy.com%2Fmedia...f=1&nofb=1]


Another new build - Kswhitetails - 05-07-2020

Very nicely done. Like the FDE. We need an updated pic, I want to see the cammo!


Another new build - Hexxler - 06-06-2020

Great