+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8)
+--- Thread: Buffer & Spring recommendation (/showthread.php?tid=20187)
Buffer & Spring recommendation - Tim WNC - 12-16-2019
I'm sure this has been covered before, and for that I apologize. In searching this forum I couldn't find a specific recommendation.
I have an 18" Wilson Combat, rifle length gas, upper on the way. It has an adjustable gas block. I'll be running a rifle length receiver extension and will shoot almost exclusively suppressed (SiCo Omega).
This rifle will be used primarily for PRS style games out to ~700 yards. Ammo will generally be match grade 123s, but I'd want it to run reliably with American Gunner 123s as a cheapish practice load.
Is there a particular buffer weight and spring combination that is proven for this combo?
Thanks!
Buffer & Spring recommendation - MarkS - 12-16-2019
I'm using the JP Customs Silent Capture Spring with the heavy buffer (JPSCS2-15H2) in my 6.5 Grendels and my 300 BLK rifles, and I really like the way they quiet down the twang and rattle.
https://www.jprifles.com/1.4.7.2_os.php
Buffer & Spring recommendation - Bigs28 - 12-16-2019
I agree with mark. Both of my suppressed grendels use the jpscs h2
Buffer & Spring recommendation - Tim WNC - 12-16-2019
Thanks y'all.
Buffer & Spring recommendation - VASCAR2 - 12-16-2019
If your using a rifle length buffer tube you can run a mil spec rifle buffer and spring but if you can afford a JP SCS spring they get very good reviews.
Buffer & Spring recommendation - ricsmall - 12-17-2019
I would also look at adjustable gas block or bootleg adjustable carrier to tame the gas. You?ll most likely want it with the omega.