+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8)
+--- Thread: AGB settings for several loads, on 16" with Suppressor (/showthread.php?tid=19334)
AGB settings for several loads, on 16" with Suppressor - grayfox - 07-31-2019
So, here's a question for those horde-sters with suppressor experience.
Say I want to shoot a 16" grendel, with an adjustable gas block and suppressor.
But want to have one basic setting for a few loads, so they would all cycle.
Granted maybe not all of these will eventually fit for me, but all have been chrono'ed for this barrel, and it would be great for 3-4 of them to work suppressed on a single setting.
Probably will be dedicated suppr, won't shoot this pipe un-suppressed once set up.
Which load will be the lightest I should set, with the others all cycling, maybe a little heavier but cycle ok.
1. 90 gr tnt at 2690 ft/s (h335)
2. 95 Vmax at 2650 ft/s (h335)
3. 100 Eldm at 2630 (Xbr)
4. 120 fusion (2430)
5. 123 sst/eldm (2430)
thanks.
AGB settings for several loads, on 16" with Suppressor - grayfox - 07-31-2019
I'm going to relocate this to the NFA section b/c it deals with suppressor issues.......