+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8)
+--- Thread: buffer weight for pistol build (/showthread.php?tid=19328)
buffer weight for pistol build - dacrafts - 07-29-2019
im looking at buying a maxim cqb brace for a 6.5 grendel pistol build , there are several buffer options , regular and silent captured spring and weight choices , kinda leaning toward the captured spring one but its about 100.00 more than regular buffer and spring and didnt know if its worth the extra cost , and which weight the grendel needs , need advice and opinions
buffer weight for pistol build - Bigs28 - 07-29-2019
Both of my short barrel grendels have jpscs h2. I also shoot suppressed and have adjustable gas blocks.
buffer weight for pistol build - ricsmall - 07-29-2019
I’m running H3 with a heavy buffer spring made for a 458 SOCOM. Also running an adjustable gasblock. This gun is only shot suppressed, and I wanted to keep from beating the rifle to pieces and try to minimize ejection port noise. Runs like a top with 123 grain pills.
buffer weight for pistol build - PNW_Grendel - 07-29-2019
I have a Ballistic Advantage 12.5, runs good with a standard carbine buffer and spring. I have 500 or so on it, zero issues. Ejection is about 3:30, recoil feels about the same as my 16" mid with carbine buffer and spring.
buffer weight for pistol build - 41bear - 07-29-2019
Am thinking about going the opposite direction with my AA 11" build. Going to try a LW carrier and reduced buffer/spring while turning my AGB down to use just enough gas to cycle properly. If it works, as expected, should not only cause less wear and tear but also reduce recoil and weight.
buffer weight for pistol build - dacrafts - 07-30-2019
thank you all for your advice in what works , i've made my decision , gonna get one on order , thanks
buffer weight for pistol build - meatsweats - 07-31-2019
H3 for sure. Make sure its a stubby. Joe bob outfitters or primary arms.
MS
buffer weight for pistol build - meatsweats - 07-31-2019
https://www.joeboboutfitters.com/KVP-Solid-Stainless-Steel-Blowback-Buffer-7-5oz-p/kvp-buffer-7.5-9mm-ss.htm
This one has worked very well in 300 BO pistol.
MS
buffer weight for pistol build - Growler - 07-31-2019
41bear Wrote:Am thinking about going the opposite direction with my AA 11" build. Going to try a LW carrier and reduced buffer/spring while turning my AGB down to use just enough gas to cycle properly. If it works, as expected, should not only cause less wear and tear but also reduce recoil and weight.
Hi Bear,
Id really like to hear how this turns out, and what carrier, buffer, and spring you use. What range of bullet weights do you plan to use with this build?
buffer weight for pistol build - Gusmeister - 07-31-2019
After quite a few builds the H2 is the overall favorite in numerous cartridges for a pistol build. However... We just finished my son's AR pistol in 300 BLK and it far preferred the lowly carbine buffer over an H1 or H2 buffer. So my suggestion is to start with an inexpensive carbine buffer and test from there. I do not run a suppressor so can't comment on that from personal experience.
buffer weight for pistol build - Kswhitetails - 08-01-2019
My 12.7 runs great with a standard carbine weight buffer. I would do your research and ensure the gas port is properly sized. Grendel runs great in my GB faxon with no special parts, no AGB, no special spring.
buffer weight for pistol build - 41bear - 08-03-2019
Growler Wrote:Hi Bear,
I’d really like to hear how this turns out, and what carrier, buffer, and spring you use. What range of bullet weights do you plan to use with this build?
My build, so far, the AA 11" barrel, ARP lw linear comp and bolt, Aero upper, WOJTEK weaponry Adj GB, RBT light weight bolt and reduced power buffer spring. Am going with carbine buffer to start with to see how it runs. The upper is complete save for the bolt, spring, and bcg small parts. My plan is to use bullets in the 85 to 105 range plus I want to try out the Nosler 129 gr. LR.
Not sure when I'll be able to test, health reasons, but hopefully by November because I really want to hunt with it this year. At 78 time is short.
Plan to post results once weapon is shot.
buffer weight for pistol build - Happy2Shoot - 08-08-2019
Just to add for posterity.
I have the 12.5" inch PSA nitride upper with adjustable gas block turned way down.
Muzzle brake is the M11 Severe-Duty .264 cal, big blast.
Spikes Tactical T3 Heavy Tungsten Carbine Buffer 5.5 oz.
If I use midrange loads with an 85 grain bullet, recoil is zero and there is a noticeable two part action with the bolt going back, then forward. Still locks back though. I may have a slightly stronger spring.
Full power loads work normal.
buffer weight for pistol build - LRRPF52 - 08-14-2019
I used the standard tiny buffer with the Maxim PDW brace kit, along with the short, stiff spring that comes with it.
Works great on 12" Grendel pistols in conjunction with the Bootleg Adjustable Gas bolt carrier.