+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8)
+--- Thread: CH for 22 (/showthread.php?tid=17670)
CH for 22 - Swampfox - 12-09-2018
My 22 build is done. I just need to decide what CH to get. I was thinking of a Raptor LT n fill it in to prevent any jams. What is you opinions?
CH for 22 - VASCAR2 - 12-09-2018
I’ve got four dedicated 22 LR AR-15’s and use standard AR-15 charging handles. I have two using CMMG barrels and bolts. I have a KKF upper which has a CMMG bolt and a Gen 1 DPMS bull barrel. The only time I’ve had issues with spent brass getting stuck in the charging handle was with a Ciener bolt. I say try your charging handle of choice and see if it works unmodified. If you encounter malfunctions then you can modify the CH.
CH for 22 - Swampfox - 12-10-2018
Thank you Vascar. Anyone had any issues with brass getting jammed in a normal CH?
CH for 22 - Swampfox - 12-10-2018
[ATTACH=CONFIG]13318[/ATTACH]Well I ordered the charging handle here is a picture of the 22 build
CH for 22 - VASCAR2 - 12-11-2018
Looks good but be careful as the rimfire AR-15’s have a tendency to multiply just like 6.5 Grendels.
CH for 22 - towerofpower93 - 12-11-2018
I use a CMMG .22lr CH and have never had an issue with brass getting lodged in the upper, even during FA fire.
A buddy has had multiple issues of .22lr brass getting caught in his standard CH, and continued to do so after filling it in with epoxy. These stoppages were a real PITA, requiring the upper to be opened and the CH and BCG removed to get the offending case removed. No way you were getting that little bugger out via the ejection port.
In my opinion, the $20 for the CMMG unit, or any of those made which do the same thing, was worth it for the peace of mind and ability to keep shooting vice clearing stuck case after stuck case.