+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Target & Competition Shooting (https://65grendel.com/forumdisplay.php?fid=12)
+--- Thread: About to order a Krieger, any objections please speak now... (/showthread.php?tid=15169)
About to order a Krieger, any objections please speak now... - Keef - 01-23-2018
As the title says, I'm close to pushing the button a custom Krieger 6.5G barrel.
Specs I'm choosing unless I shouldn't.
Summary of Order:
Service Rifle Type:
AR15 Caliber: 6.5MM
Steel: Stainless Steel
Contour Type: VARMATCH
Overall Length: 24 IN
Muzz. Diam.: 0.920 IN
Twist Rate: 1-7.5 Inches
Bore Dia: 0.256 Inches
Groove Dia: 0.264 Inches
Fit / Chamber: Finish Chamber & Crown
Chamber Type: 6.5MM Grendel
Parts: Barrel Extension
And I'll probably get a JP superbolt from them at the same time.
Planning to order by Friday unless there is a better option.(the other thing tempting me is the BSF carbon barrel, but it comes in 20" max length)
About to order a Krieger, any objections please speak now... - Clarence - 01-23-2018
I don't think you can go wrong with a Krueger. Expensive, but first class!
Clarence
About to order a Krieger, any objections please speak now... - Klem - 01-23-2018
That's going to be a long and heavy gun. Not my cup of tea but Kreiger has a great rep and I'm sure you will enjoy it.
(you could build an AR10 in 6.5Creedmore and have a gun that is both shorter and lighter, while capable of achieving what a 24"Gr can do).
About to order a Krieger, any objections please speak now... - bj139 - 01-24-2018
Klem,
I like your thinking about an AR-10.
When I saw the muzzle diameter of .920" and a 24" length I thought the same thing.
That will be a barbell.
I have a BHW 18" bull barrel and it is as heavy as I would want.
About to order a Krieger, any objections please speak now... - sschefer - 01-24-2018
Klem Wrote:That's going to be a long and heavy gun. Not my cup of tea but Kreiger has a great rep and I'm sure you will enjoy it.
(you could build an AR10 in 6.5Creedmore and have a gun that is both shorter and lighter, while capable of achieving what a 24"Gr can do).
My AA 20" is heavy enough that I will probably only use it for drive in hunting trips. This one sounds even heavier unless it's fluted.
About to order a Krieger, any objections please speak now... - Keef - 01-24-2018
I already have a 12"ish pistol and a fluted 18"er. So this will be for maximum accuracy and longe range performance from a bench or maybe a tripod. But i will admit I hadnt really thought how heavy it would be......
Klem as to the creedmore, Ill look into it but Ive always tried to keep the minimum # of diff calibers. The barrel is $480.00.
About to order a Krieger, any objections please speak now... - bj139 - 01-24-2018
For what you want it for, it should be a great choice.
About to order a Krieger, any objections please speak now... - ricsmall - 01-24-2018
Ive dealt with two kreiger Grendel barrels and both had minimum spec chambers. Thats just the reamer kreiger specs out. You couldnt load a factory round by hand and have it drop out. Shot good, just tight, a little too tight for my liking. Reamed both out with my Manson reamer and they feed and extract much smoother. And as an added bonus both will shoot cloverleaf ten shot groups now. Just be prepared to check that out.
Richard
About to order a Krieger, any objections please speak now... - StoneHendge - 01-24-2018
For bench, go for it, I had a 24” 556 fluted bull barrel that weighed in at about 4.25 lbs. managed to wear it out in a little over 2 years with about 7-8k down the pipe. Heavy long barrel = light recoil = more trigger time.
About to order a Krieger, any objections please speak now... - LR1955 - 01-24-2018
Keef Wrote:As the title says, I'm close to pushing the button a custom Krieger 6.5G barrel.
Specs I'm choosing unless I shouldn't.
Summary of Order:
Service Rifle Type:
AR15 Caliber: 6.5MM
Steel: Stainless Steel
Contour Type: VARMATCH
Overall Length: 24 IN
Muzz. Diam.: 0.920 IN
Twist Rate: 1-7.5 Inches
Bore Dia: 0.256 Inches
Groove Dia: 0.264 Inches
Fit / Chamber: Finish Chamber & Crown
Chamber Type: 6.5MM Grendel
Parts: Barrel Extension
And I'll probably get a JP superbolt from them at the same time.
Planning to order by Friday unless there is a better option.(the other thing tempting me is the BSF carbon barrel, but it comes in 20" max length)
Keef:
Guess you won't be shooting it in any sort of formal competition.
Barrel will be way too heavy and awkward for anything other than a rest.
7 1/2 twist? Not normal for a 6.5. 8 twist is normally considered the ideal twist for the 130 and 140's. Wonder why Krieger is making one in 7 1/2? Probably because they are looking at barrels for super long range blasters firing 150 grain 6.5 bullets or some of the very long match grade bullets made these days. You may want to consider a 8 twist. I would.
LR55
About to order a Krieger, any objections please speak now... - 454bore - 01-27-2018
I have a Krieger 6mm grendel build that shoots 1/2 MOA when I do my part.
I wold imagine a 65grendel will do the same.
They are expensive.
My cheaper grendel barrel shoots just as good after lapping the bore with tubbs final finish.
Shoots 1/2 inch with 123 Amax over ARcomp.
About to order a Krieger, any objections please speak now... - Keef - 02-06-2018
ricsmall Wrote:I’ve dealt with two kreiger Grendel barrels and both had minimum spec chambers. That’s just the reamer kreiger specs out. You couldn’t load a factory round by hand and have it drop out. Shot good, just tight, a little too tight for my liking. Reamed both out with my Manson reamer and they feed and extract much smoother. And as an added bonus both will shoot cloverleaf ten shot groups now. Just be prepared to check that out.
Richard
Good to know, thank you.
About to order a Krieger, any objections please speak now... - Keef - 02-06-2018
LR1955 Wrote:Keef:
Guess you won't be shooting it in any sort of formal competition.
Barrel will be way too heavy and awkward for anything other than a rest.
7 1/2 twist? Not normal for a 6.5. 8 twist is normally considered the ideal twist for the 130 and 140's. Wonder why Krieger is making one in 7 1/2? Probably because they are looking at barrels for super long range blasters firing 150 grain 6.5 bullets or some of the very long match grade bullets made these days. You may want to consider a 8 twist. I would.
LR55
I was going with the 7.5 twist because I've read that will help keep the bullet stable longer once it reaches transonic(I think thats the word) speeds.
About to order a Krieger, any objections please speak now... - Keef - 02-06-2018
I'm kinda worried about the weight, I haven't bought anything yet, except a pole barn kit last week and a root canal today
lol
About to order a Krieger, any objections please speak now... - silverduck - 02-13-2018
I have a 24" Krieger, bull,1/8, from Precision. Shoots 1/2" or less. Zero problems and I have won a couple of 600Y, F-class matches with it. It is heavy.
About to order a Krieger, any objections please speak now... - hikfromstik - 03-02-2018
I love my 24" Lilja . It's slings 123gr to 2675fps with no pressure signs . I could probably get over 2700fps if I didn't care about brass life . I'm gonna rebarrel my howa 1500 to either a 6mm Grendel or just a regular Grendel . It will be a 26" long throat varmint profile for 600yd f class style shooting.
About to order a Krieger, any objections please speak now... - rwh - 03-02-2018
I have a Krieger 26" on a space gun. It's an excellent shooter. My only complaint is that Krieger uses a SAMMI minimum spec reamer which doesn't have a lot of freebore. It works great for berger 130s seated to mag length but I could only seat 123 scenars out to 2.250. I could seat out to 2.280 with the same bullet in a barrel I got from precision firearms. You can always have the barrel throated to whatever freebore you need but it's an extra step.