+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8)
+--- Thread: School me on Grendel II and SAAMI (/showthread.php?tid=14801)
School me on Grendel II and SAAMI - tracker12 - 12-12-2017
So whats the difference and should the difference influence me on a new build.
School me on Grendel II and SAAMI - zcostilla - 12-12-2017
I’d start with the stickies at the top of this forum
School me on Grendel II and SAAMI - Redraider - 12-12-2017
Stick with SAMMI, .136 bolt face depth and never look back!!!!
School me on Grendel II and SAAMI - Kswhitetails - 12-13-2017
zcostilla Wrote:I’d start with the stickies at the top of this forum
+1
School me on Grendel II and SAAMI - tracker12 - 12-13-2017
Where I have been for the last hour. Thanks for pointing me in the right direction.
School me on Grendel II and SAAMI - cb4017 - 12-13-2017
When I got into the Grendel a year ago I went through the same confusion. Seems different manufacturers want to do the Grendel different ways. I made the decision to stick with the SAAMI spec chamber with .136" bolt. You need to be careful when reading barrel descriptions. Sometimes it's not clear what you're getting.
School me on Grendel II and SAAMI - Willfg - 12-13-2017
So, I went with a BHW barrel (great deal was part of, not the only, the reason), which is Type I, which is .125. Other than being careful about getting the right bolt I'm not sure any other "downsides" have been really clear to me...
School me on Grendel II and SAAMI - zcostilla - 12-13-2017
I made the same decision, based upon the advice given here.
School me on Grendel II and SAAMI - zcostilla - 12-13-2017
Willfg Wrote:So, I went with a BHW barrel (great deal was part of, not the only, the reason), which is Type I, which is .125. Other than being careful about getting the right bolt I'm not sure any other "downsides" have been really clear to me...
I made the same decision to go SAAMI, based upon the advice given here. I read multiple posts about broken boltse with the 0.125" bolt faces.
School me on Grendel II and SAAMI - LRRPF52 - 12-15-2017
zcostilla Wrote:I made the same decision to go SAAMI, based upon the advice given here. I read multiple posts about broken boltse with the 0.125" bolt faces.
.125" bolt face depth results in high likelihood of broken extractors, not the bolt.
School me on Grendel II and SAAMI - zcostilla - 12-16-2017
LRRPF52 Wrote:.125" bolt face depth results in high likelihood of broken extractors, not the bolt.Yes, that's right. Thanks for the clarification.