+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8)
+--- Thread: Lothar Walther (/showthread.php?tid=1475)
Lothar Walther - kcgrendel - 11-18-2011
If I remember correctly from the old site there was information stating when AA uppers used LW barrels. Could someone refresh my memory on when those barrels were in production at AA? I don't want to start a debate about why it stopped or who was at fault for it, just curious a timeline. Thanks
Lothar Walther - Bill Alexander - 11-19-2011
We used the Walther barrels for a number of years, roughly 2004 through 2008 ish. But these were among others we used for the Grendel.
Lothar Walther - leopard6.5 - 11-19-2011
Bill: Was there a headspace or bolt problem with some of the Satern barrels last spring?
I seem to remember some problem mentioned on the forum at that time and I don't remember what the exact problem was but I seem to remember that it involved the bolt.
Thanks for your help and your clarification here on the forum in regards to the questions that come up.
Lee
Lothar Walther - Bill Alexander - 11-20-2011
Not sure what went on, did not see anything specific with my stuff but I would always use my own bolts and HS per normal set up. We did initially run the HS a little tight on the minimum spec but nothing of note for a high end barrel.
Lothar Walther - kcgrendel - 11-20-2011
Thank you very much Bill, that is what I was wondering. Great cartridge btw.