+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Photo Gallery (https://65grendel.com/forumdisplay.php?fid=16)
+--- Thread: My first Grendel build... (/showthread.php?tid=1438)
My first Grendel build... - Grendel-Gene - 11-14-2011
I have 5 ARs and 2 SR-25s... but the 223 is too little and the 308 is too much. That's why i was so excited about the Grendel and decided to make it the best I could afford.
I first wrestled with the barrel length.... I wanted a rifle that could do a bit of long range work, and yet compact enough so that it could work reasonable well in close quarters. I settled on an 18 Satern fluted as a decent compromise... but i would have probably bought a 16" barrel if i could have found a nice fluted one at the time...
The parts I used are these:
Vltor A2 flash hider
Spartan 18” fluted barrel
AA hardened bolt.
Young manufacturing bolt carrier.
Vltor low profile stainless gas block.
Vltor MUR upper.
TROY mid length rail hand guard.
Magpul MBUS sights ( front and rear ).
Alexander Arms lower receiver.
DPMS lower parts kit.
AR gold trigger
Vltor buffer tube sling adapter.
Command Arms modular pistol grip system.
Spikes tactical heavy carbine buffer ( this is a great buy )!!!
Stock carbine buffer spring.
Mag Pul CTR stock.
Unknown brand of buffer tube.
unknown brand bolt carrier group parts and fireing pin.
Optics are:
Acog
Eotech 512
Then,
Grendel C product mags.
UTG 150 lumen LED light
Knights manufacturing rail cover.
Knights rail mounted grip.
![[Image: NIK_7600.jpg]](http://i1234.photobucket.com/albums/ff408/sr28er/NIK_7600.jpg)
![[Image: NIK_7601.jpg]](http://i1234.photobucket.com/albums/ff408/sr28er/NIK_7601.jpg)
My first Grendel build... - LRRPF52 - 11-14-2011
Nice blaster..groups? What loads do you plan to shoot through it?
My first Grendel build... - Grendel-Gene - 11-14-2011
So far i have been dissapointed... but i was told that is was the 123 grain soft point wolf ammo.... I will let you know as soon as i can get some good stuff down through it.
My first Grendel build... - LRRPF52 - 11-14-2011
Grendel-Gene Wrote:So far i have been dissapointed... but i was told that is was the 123 grain soft point wolf ammo.... I will let you know as soon as i can get some good stuff down through it.
Clean that barrel well, and run some good bullets through it. The 123gr SP's are lucky to shoot 2-3 MOA. I pulled most of mine for the brass, but I have no real use for the brass since I have plenty of Lapua brass.
My first Grendel build... - YutYut - 11-14-2011
Use hornady 123's if you want to achieve some nice sub moa results.
http://www.palmettostatearmory.com/1299.php
My first Grendel build... - txgunner00 - 11-15-2011
Nice piece.
My first Grendel build... - Whelenon - 11-15-2011
nice job, good looking
My first Grendel build... - Grendel-Gene - 11-16-2011
Thanks. I am thinking seriously about building two more, one long and one short barreled. The long barreled would be a sniper version with the fancy Magpul butt stock that is fully adjustable... , the short, an M4 clone. For now i want to focus on enjoying this one with some REAL AMMO, not the wolf crap i currently have around and see what i get. Also never had an Eotech... so that will be cool too.
Now if only some hogs would wander over again.... ha ha !
My first Grendel build... - bwaites - 11-16-2011
Well, if you REALLY want to knock the hogs over, you need one of these!
![[Image: billguns0234x6.jpg]](http://img684.imageshack.us/img684/7832/billguns0234x6.jpg)
![[Image: billguns0274x6.jpg]](http://img21.imageshack.us/img21/8125/billguns0274x6.jpg)
My first Grendel build... - txgunner00 - 11-16-2011
Nice hog blaster.
My first Grendel build... - Grendel-Gene - 11-16-2011
bwaites Wrote:Well, if you REALLY want to knock the hogs over, you need one of these!
what caliber is that?
My first Grendel build... - leopard6.5 - 11-16-2011
Grendel-Gene: 50 caliber Beowulf. Looks great doesn't it( as all of Bill's do).
My first Grendel build... - Grendel-Gene - 11-16-2011
The problem is that i would actually want some MEAT off of the hog.... and there wont be much left after you blow it up with that Beowulf!!!! Ha ha ha!!!!,
But seriously, thats a nice rig.... it would be a great affirmative action rifle!!!
My first Grendel build... - bwaites - 11-16-2011
Grendel-Gene Wrote:The problem is that i would actually want some MEAT off of the hog.... and there wont be much left after you blow it up with that Beowulf!!!! Ha ha ha!!!!,
But seriously, thats a nice rig.... it would be a great affirmative action rifle!!!
Naw, use the right bullets and its just "bang, FLOP". No more meat damage than the Grendel. And heck, it can't hurt more meat than 12 or 15 .223's!!!!
Here's a great short article:
http://www.gunsandammo.com/2011/07/14/whats-the-50-beowulf-good-for/
My first Grendel build... - Grendel-Gene - 11-16-2011
Well on the day the hogs showed up i wasnt hunting.... otherwise i would have had the right ammo and all. I wad just responding to a potential threat to my grandkids and property. To make matters worse, i had just come home from being with my wife all day in the hospital, so i was in no mood to salvage the meat. I just called some friends who hauled the hogs off. They bbqed the small ones....