+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: GENERAL FIREARMS DISCUSSION (https://65grendel.com/forumdisplay.php?fid=38)
+--- Forum: Optics, Accessories, Parts, and Equipment (https://65grendel.com/forumdisplay.php?fid=14)
+--- Thread: Anyone ever get a scope & rings CAMMO DIPPED? (/showthread.php?tid=1321)
Anyone ever get a scope & rings CAMMO DIPPED? - hm2 clark - 10-30-2011
I am considering getting a scope and rings cammo dipped to match the rifle and stock. Does any one have any recomendations as to a shop?
Anyone ever get a scope & rings CAMMO DIPPED? - LRRPF52 - 10-31-2011
There are more and more people doing it. You will need to make sure the glass is sealed off when you do do it, since it is a water-immersion process. If you use flip-up caps, you might plug the glass underneath the caps and have it dipped with the caps closed. Water-immersion dips tend to scratch though.
Anyone ever get a scope & rings CAMMO DIPPED? - jwilson1985 - 10-31-2011
i dip, lr if you start use a cerakote clear over it and that will stop the scratching...also any one you find to do it , is going to make you sign a waver saying they are held reliable for any damages done to the scope ,and its up to you to know if its water proof ...but scopes have been done a lot
Anyone ever get a scope & rings CAMMO DIPPED? - LRRPF52 - 10-31-2011
I was thinking of doing that exact thing, but I think there is room for improvement in the chemical composition of the water transfer prints as well, along with the activator. It would be a game-changer if someone did what I would do, but I don't have a degree in chemical engineering. I'll bet they're already working on it though.
When I was in the Army, I used Rustoleum textured paint on my furniture and rail covers, then applied tons of flat matte clear over it for protection, which worked ok. It never glossed-up with use, which was my intent. Here's a better pic of that method:
[ATTACH=CONFIG]535[/ATTACH]
The reason was because Bowflage comes right off with regular use and especially rain.
Anyone ever get a scope & rings CAMMO DIPPED? - hm2 clark - 11-01-2011
Thanks guys