+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Photo Gallery (https://65grendel.com/forumdisplay.php?fid=16)
+--- Thread: My first Grendel bulid (/showthread.php?tid=12539)
Pages:
1
2
My first Grendel bulid - Ten Ring - 01-17-2017
20in Shillen match Barrel and bolt
Stoner bolt carrier
Stoner stainless steel low profile gas block
Vltor mur upper receiver, forearm and gun fighter operating handle
My first Grendel bulid - Ten Ring - 01-17-2017
Ten Ring Wrote:20in Shillen match Barrel and boltSorry left out Rifle length gas system and the shillen is a H bar
Stoner bolt carrier
Stoner stainless steel low profile gas block
Vltor mur upper receiver, forearm and gun fighter operating handle
My first Grendel bulid - jim_bob - 01-18-2017
Nice looking upper, now we need some group pics!
My first Grendel bulid - Ten Ring - 01-18-2017
Once I get glass for it I will , hard because my time and money is split between to expensive hobbie.
Guns and RC Airplanes.
My first Grendel bulid - Ateup - 01-19-2017
Ten Ring Wrote:Once I get glass for it I will , hard because my time and money is split between to expensive hobbie.
Guns and RC Airplanes.
WTF man? Guns not toy airplanes!
My first Grendel bulid - Ten Ring - 02-18-2017
These groups were not shoot from a bench but from a standing rest
Factory Hornady 123 SST
AND a crap bushnell banner scope
My first Grendel bulid - 1075 tech - 02-19-2017
Getting there. Not bad from standing, especially if unsupported. Good luck getting it dialed in.
My first Grendel bulid - Ten Ring - 02-22-2017
I have to also work out my flinching. Around a month ago I blew a 300 win mag up in my hands and it may have given me a bit of a flinch when pulling the trigger lol. The first round of each group was be for a clean Barrel
My first Grendel bulid - pianoman9701 - 03-10-2017
Ten Ring Wrote:Once I get glass for it I will , hard because my time and money is split between to expensive hobbie.
Guns and RC Airplanes.
Unless you have some sort of ordnance on that RC, there should be no question about which project gets your hard-earned scratch!!!
My first Grendel bulid - Texas - 03-10-2017
The Grendel is much more pleasant to shoot than a 300 Win mag, especially one that goes BOOM! I developed a flinch from a 300 Win Mag in 1974 after shooting military match for years with a NM Garand. I still think about not flinching or jerking the trigger to this very day, it is a mental game.
My first Grendel bulid - Ten Ring - 03-19-2017
[ATTACH=CONFIG]8919[/ATTACH]
Hi one more test target the string up the middle is the last of the breaking in of the barrel and two separate adjustments of the scope on 5 round groups. Bottom is left is a five round group the last I shot. As you may see I still have a flinch,need I need a lot of range time this summer to work it out. T
My first Grendel bulid - Ten Ring - 03-19-2017
Sorry bottom right. Need to work on my dyslexia as well
My first Grendel bulid - Ten Ring - 03-19-2017
They were all factory hornady 123 A-Max
Still with a shity bushnell Bantam 4x16
My first Grendel bulid - A5BLASTER - 03-19-2017
What trigger are you running in that rifle?
My first Grendel bulid - Ten Ring - 03-19-2017
..
My first Grendel bulid - Ten Ring - 03-19-2017
Timney 4.5 lbs
My first Grendel bulid - A5BLASTER - 03-19-2017
I was going to say maybe upgrade the trigger to help with groups but it sounds like you have a decent trigger in already.
My first Grendel bulid - just_john - 03-20-2017
The flinch will pass with time and exposure. We have all been down that road at one time or another. Do you use the RC planes to tow targets for the grendel?
My first Grendel bulid - Ten Ring - 03-21-2017
He really it thought of that, would have to keep them low so as not to by lunching 6.5 rounds carelessly over the horizon. Lol
My first Grendel bulid - sergio88web - 09-20-2017
Looks great. I build a DMR 20" heavy barrel with side charging upper, I'm still waiting for my SWFA scope