![]() |
|
Talk to me about SBR 6.5 Grendel setups - Printable Version +- 6.5 Grendel Forum (https://65grendel.com) +-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3) +--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8) +--- Thread: Talk to me about SBR 6.5 Grendel setups (/showthread.php?tid=12181) Pages:
1
2
|
Talk to me about SBR 6.5 Grendel setups - ahillock - 11-25-2016 Anyone on here have extensive history with a 6.5 Grendel SBR? What length would you recommend? Any advice on things to do or not to do? My current Grendel is a 16" build. Looking into doing a future SBR build. Talk to me about SBR 6.5 Grendel setups - ahillock - 11-25-2016 Also I know about the not using a lower previously registered as a long gun and to use a fresh virgin lower for the build. I plan to go the AR pistol route and then submit tax stamp paper work to get the rear stock approved. Thread is more about getting ideas and advice for a short barrel setup. Talk to me about SBR 6.5 Grendel setups - Texas - 11-25-2016 We have had the best success with 11-12 inch barrels in 6.5 Grendel and 5.56X45. Talk to me about SBR 6.5 Grendel setups - ahillock - 11-25-2016 Texas Wrote:We have had the best success with 11-12 inch barrels in 6.5 Grendel and 5.56X45. Any barrel manufacturers in particular? Talk to me about SBR 6.5 Grendel setups - Texas - 11-25-2016 I have been using primarily Sabre Defence barrels in 6.5 Grendel which can still be picked up reasonably. You may want to consider the 12" group buy now available through this group, the experience with the other length barrels has been excellent from the reports. Talk to me about SBR 6.5 Grendel setups - ahillock - 11-25-2016 I'll need to consider that Faxon group buy. I had heard Ballistic Advantage was going to get into 6.5 Grendel barrels and was considering waiting to see what they put out. But maybe the group buy is the route to consider. Talk to me about SBR 6.5 Grendel setups - cory - 11-25-2016 You can't go wrong with the Lilja 11.5" or 12.5". My Lilja 11.5"
Talk to me about SBR 6.5 Grendel setups - LRRPF52 - 11-26-2016 It's the most potent combination you can have in a compact AR15, with expansion out at distance for hunting, low recoil, and ease of maneuver. 10.5" gives you expansion out to 260yds with the 123gr SST, and 700yds with the 129gr ABLR, which is more than twice the distance you would engage medium game at in most cases. The 10.5" 6.5 Grendel with 129gr ABLR maintains 900ft-lbs of energy out to just over 275yds, and 800ft-lbs to almost 375yds if you care about ft-lbs. 11.5" with a 129gr ABLR gives you: 100yds 2066fps 1223ft-lbs 200yds 1928fps 1065ft-lbs 300yds 1796fps 924ft-lbs 400yds 1671fps 800ft-lbs 12.5" 129gr ABLR 425yds 1674fps 802ft-lbs 123gr SST at 2320fps mv 300yds 1816fps 900ft-lbs 375yds 1702fps 791ft-lbs Just for reference using a 20" barreled .30-30 with a 150gr RN Hornady: 175yds 1599fps 852ft-lbs 200yds 1515fps 764ft-lbs Talk to me about SBR 6.5 Grendel setups - ahillock - 11-26-2016 Thanks LRRPF52. That is some nice data. I'm considering the group buy for the 12" just for entry cost + support forum group buy + to try and see if I like the short length. 12" seems like a decent length to start with. Can always cut it down or get another barrel one day. Talk to me about SBR 6.5 Grendel setups - ahillock - 11-26-2016 cory Wrote:You can't go wrong with the Lilja 11.5" or 12.5". Beautiful. Any idea what the weight is? Suppressors work ok with standard Grendel rounds? Talk to me about SBR 6.5 Grendel setups - Jakal - 11-28-2016 This thread fit the best for my post, not trying to hi-jack the thread. It's more about the load development and the results with a short barrel. Gun: 12.5 Lilja Barrel + Heartbreaker Comp Geissele SSAE trigger LaRue Mount Ziess 3-9x50 Conquest Seekins lightweight rail Seekins Billet upper Seekins Low-profile adjustable gas block The Jack billet lower by Spikes Thordsen MFA Saddle cheek assist BCG Gunfighter Mod4 Charging handle CrossTac sling Houge Overmolded Pistol grip ]The Load: 129grain Nosler AccuBond Long Range 27.0 grains of XBR8208 CCI450 Hornady case COAL: 2.26 2160 fps The Results: 2 big Does in 2 days, only pics of first doe as second doe was a repeat of first doe, only difference; exit wound on second deer blew out its other shoulder and still exited. 150 yards from stand slight 1/4 towards me shot went in under right front armpit, blew out a rib, made a mess of everything inside exit mid section before diaphragm after blowing out another rib. exit hole about 1-1/2 inches wide she ran on pure adrenaline maybe 50 yards, crashed and piled up. ![]() ![]() ![]() Pros; Everything about this gun is great, small profile, lightweight, very accurate and the load is devastating. ****Thanks LRRPF52 for the heads up on the 129 Nosler!, haven't had a coyote come thru yet but can imagine they won't get far with this!***** Cons: Need hunting hearing protection for left ear as the "EAR-SLAP" is pretty bad. Had enough time to insert a formable ear plug before the shots. Talk to me about SBR 6.5 Grendel setups - Beerswimmer - 11-28-2016 Nice Jakal!! I paid for one of the 12" Faxon barrels in the group buy. Mine will be a pistol with a Shockwave brace. Next spring/summer I'll be filling out forms for SBR and a suppressor once I'm done moving. Talk to me about SBR 6.5 Grendel setups - Chrazy-Chris - 11-29-2016 LRRPF52 Wrote:It's the most potent combination you can have in a compact AR15, with expansion out at distance for hunting, low recoil, and ease of maneuver. What makes the ABLR better at 400yrds than the SST? From what I can figure, the SST will have a higher velocity and more energy. I assume this is because the ABLR claims to expand better at lower velocities? I'd like to see a side by side comparison with ABLR vs SST at 1600 fps or so. On a different note - question to the OP: Why have such a long muzzle device if a short barrel is what you're after? Not knocking your choice, just generally curious. It seems like that length would be better suited with a few more inches of barrel to add some max effective range to your rig. Judging by your shooting on that doe, reducing recoil for followup shots isn't really necessary I'm assuming that brake certainly isn't helping the "ear slap" mentioned.
Talk to me about SBR 6.5 Grendel setups - Jakal - 11-29-2016 Chris, I am not the OP but have the post on top of page 2. I originally had a Lilja thread-protector on the muzzle and not the comp. I changed it out due to follow up shots as you mentioned. And you are right it does not help any on the Ear-Slap. I may change back out to the thread protector. But the gun is running great right now and if I change back out, I may have to rework my load. Also, it helps that I can lay the gun across my shooting rail without it dropping thru! Going from 26-20 inch barrels, I don't notice the extra 2.5 inches. Hornady suggest a minimum impact opening velocity of 1800 fps for the 123 SST BC of .510. The Nosler 129grain ABLR BC of .561 will open down to 1300 fps. That helps with the distance you can take game. I wanted this gun for deer and coyotes. Had 4 coyotes run out in about 30 minute span last year and wasn't set up to take them (using a 458 SOCOM last year). That has all been rectified! Talk to me about SBR 6.5 Grendel setups - LRRPF52 - 11-29-2016 Chrazy-Chris Wrote:What makes the ABLR better at 400yrds than the SST? From what I can figure, the SST will have a higher velocity and more energy. I assume this is because the ABLR claims to expand better at lower velocities? I'd like to see a side by side comparison with ABLR vs SST at 1600 fps or so. ABLR has a .553 G1 BC (Litz), compared to the SST's .462 G1. ABLR expands fully as soon as it enters, and has the longer expansion threshold down to 1300fps, making it an excellent choice for an SBR. The BC and weight help it retain energy better than most other hunting bullet choices for the 6.5 Grendel. Talk to me about SBR 6.5 Grendel setups - Jakal - 11-29-2016 LRRPF52, Are the Litz BC's determined from field testing vs a testing chamber? Had always heard the bullet makers inflate and average their BC's. Is this the difference between Litz and Hornady/Nosler stated BC's? I can't see that much difference between the .553 and .561 of the Nosler bullet but the BC difference of .462 to .510 is quite a step on the Hornady. That will show up at longer ranges. Talk to me about SBR 6.5 Grendel setups - ahillock - 11-29-2016 Beerswimmer Wrote:Nice Jakal!! I paid for one of the 12" Faxon barrels in the group buy. Mine will be a pistol with a Shockwave brace. I am considering doing the same build with a Shockwave brace. I'll probably wait a while to see if there is any change in the tax stamp stuff with the new President before going down that road. Talk to me about SBR 6.5 Grendel setups - jim_bob - 12-06-2016 I've been very pleased with my 11.5" Lilja barrelled SBR. It has earned its spot as my deer blaster. It put two in the freezer last year and another two in the freezer so far this year. I hunt the Blue Ridge Mountains, part of the Appalachian Mountain range. I don't hunt any spots that would offer a shot over 300 yards, and I doubt I'd attempt to take one much over 200 given my ability, or lack thereof. The longest shot I've made was last year on a large doe in a field right at 190 yards last year, DRT with the 123 SST, the last 5 minutes of my last hunt of the year. The other 3 have been within 100 yards and none have ventured too far. I am in on the 12" Faxon buy too, but I will get it chopped to 10.5". http://www.65grendel.com/forum/showthread.php?10807-Deer-Stand-Rifle-or-the-configuration-formally-known-as-Mini-Recce Talk to me about SBR 6.5 Grendel setups - jim_bob - 12-06-2016 LRRPF52, do you know of any factory loads using the 129 ABLR? Talk to me about SBR 6.5 Grendel setups - VASCAR2 - 12-06-2016 Precision Firearms load the 129 grain Nosler ABLR in Lapua brass however the web site shows the ammo out of stock. https://secure.wf-api.com/www.precisionfirearms.com/m8/6.5%20Grendel%20129%20Nosler%20Accubond%20Long%20Range--6-5-grendel-129-nosler-accubond-long-range.html |