+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Photo Gallery (https://65grendel.com/forumdisplay.php?fid=16)
+--- Thread: The new 20 inch Odin works is finally complete!!! (/showthread.php?tid=11952)
The new 20 inch Odin works is finally complete!!! - diddlyv - 10-11-2016
Here is my new baby. His older brother a 16 inch Barrier Defense is jealous as the new baby out shoots him.[ATTACH=CONFIG]8187[/ATTACH]
The new 20 inch Odin works is finally complete!!! - Goochylogic - 11-01-2016
Nice build. Im putting one together now. How do you like the barrel.
The new 20 inch Odin works is finally complete!!! - diddlyv - 11-01-2016
I like the barrel a lot. Shot several rounds of Wolf cheapo steel and a few hornady down range without a target. Then shot the remainder of the Wolfe box zeroing the scope. Then shot 3 groups of 3 rounds of 123 sst hornady factory off a front bag with no rear support. Grp 1 .750 Grp 2 .825 and Grp 3 .750. Not too shabby.
The new 20 inch Odin works is finally complete!!! - Diemaker44 - 11-05-2016
Very nice!!
I am building one myself with the 20" Odin works.
What butt stock is that? Magpul?
How long is your fore-end?
thanks.
The new 20 inch Odin works is finally complete!!! - jim_bob - 11-06-2016
Nice looking blaster, target pics?
The new 20 inch Odin works is finally complete!!! - robertc1024 - 11-06-2016
Diemaker44 Wrote:What butt stock is that? Magpul?
It's a Luth AR. I've got one on my Grendel. They are a lot lighter than the Magpul PRS stocks.
The new 20 inch Odin works is finally complete!!! - mdram - 11-06-2016
any clue what chamber odin uses, they never replied to my email
The new 20 inch Odin works is finally complete!!! - m796rider - 11-06-2016
mdram Wrote:any clue what chamber odin uses, they never replied to my email
They've told me via email and on the phone they use a SAAMI Grendel chamber.
The new 20 inch Odin works is finally complete!!! - Drillboss - 11-06-2016
m796rider Wrote:They've told me via email and on the phone they use a SAAMI Grendel chamber.
If so, why don't they realize that stating so would eliminate all the confusion?
I'm certainly not trying to say that Odin Works makes bad barrels or that they aren't SAAMI spec. Their website info just indicates that it could be otherwise.
Could someone that has one post the max dimension they see with the Hornady OAL gage?
The new 20 inch Odin works is finally complete!!! - Digitalfalcon - 11-08-2016
Diddlyv, what bolt are you using? The Odin works bcg or another?
The new 20 inch Odin works is finally complete!!! - Digitalfalcon - 11-08-2016
Diemaker44, what bolt did you go with for your Odin barrel?
The new 20 inch Odin works is finally complete!!! - waynec - 11-08-2016
Ive been looking at odin works 20 incher too
The new 20 inch Odin works is finally complete!!! - diddlyv - 11-26-2016
Odin bolt and bolt carrier
The new 20 inch Odin works is finally complete!!! - geezy415 - 01-03-2017
everyone doing the whole odin works thing?
The new 20 inch Odin works is finally complete!!! - geezy415 - 01-03-2017
is it worth going up from and 18" to a 20."
The new 20 inch Odin works is finally complete!!! - csmwhjones - 01-05-2017
I have the 18" Odin works barrel, info was hard to find but from what I found it is a G2 but a LBC (Les Baer Custom chamber). My COL are to the ogive using the 26 ogive guage from Hornady. Nosler 120g Hunting 1.759"BTHP 1.780", and Berger 130g VLD-H 1.725". Found little use in the COL for less than 120g pills because they stick out so far. Hope this helps. BTW everything seems to shoot better at .40-.50 off the lands. I use ASC mags that allow a little longer COL.
The new 20 inch Odin works is finally complete!!! - Texas - 01-05-2017
diddlyv Wrote:Here is my new baby. His older brother a 16 inch Barrier Defense is jealous as the new baby out shoots him.[ATTACH=CONFIG]8187[/ATTACH]
Very nice!