+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Build-It-Yourself & Custom Builds (https://65grendel.com/forumdisplay.php?fid=9)
+--- Thread: 16" mid length build buffer recomendations (/showthread.php?tid=11535)
16" mid length build buffer recomendations - olde sarge - 07-05-2016
I am in search of recommendations for a new build I am adding to my Grendel lower. Although it is not a 6.5 I hope I can get some info. If I am violating any rules please remove post. The barrel is a 16" Faxon 1-8 twist 5.56. Adjustable SLR .750 gas block. Full mass carrier. Has a mid length gas system. Gas hole drilled in barrel is .076-.078" as close as I can measure with my calipers. Need to know what our knowledgeable members would use for buffer as a start point. Thank you
16" mid length build buffer recomendations - A5BLASTER - 07-05-2016
JP SCS Gen I or Gen II
16" mid length build buffer recomendations - olde sarge - 07-06-2016
A5BLASTER, Thanks for the reply. I thought I might get a few other replies. My PF lower has a JP SCS in it now so I guess I will not need to change it. Was thinking of building another lower so wanted the input of a few members. Thanks again, John
16" mid length build buffer recomendations - A5BLASTER - 07-06-2016
No problem sir glad I could help.