![]() |
|
Range day 8208 AR Comp data - Printable Version +- 6.5 Grendel Forum (https://65grendel.com) +-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3) +--- Forum: 6.5 Grendel Ammunition & Reloading (https://65grendel.com/forumdisplay.php?fid=10) +--- Thread: Range day 8208 AR Comp data (/showthread.php?tid=10826) |
Range day 8208 AR Comp data - Cornbread - 02-21-2016 BHW 18" 123 Amax cci 41 Hornady brass 28 gr 8208 2.295 coal 2480 fps 1" 5 shots 2.285 coal. 2469 fps .65" 5 shots 2.265 coal. 2476 fps .810" 5 shots 2.285 coal 2499 fps 1.1" 5 shots Velocity avg 2483 .89" avg group size 20 shots 123 SST same as above load specs 2.285 coal 5 3 shot groups avg velocity 2493 avg group size .831. Ar comp data 123 SST cci 41 hdy brass 2.285 coal 27.5 gr 2446. 1.66" 3 shots 27.8 gr. 2469 .752". 3 shots 28.1 gr 2502 1.46". 4 shots 27.8 gr 2485 1.24" 4 shots As a side note I found AR comp to be very dirty compared to 8208. With 8208 aprox 5-6 solvent patches and barrel was clean. It took about 20 patches with AR comp. Next trip going to load shorter coal, closer to factory amax length see if anything changes. Also going to try some ballistic tips. Range day 8208 AR Comp data - 1911man - 02-21-2016 Nice data, I tested that same XBR load of 28 grains in my 18" BHW barrel and was about 25-30 fps slower. I was loading them much shorter though at 2.250 . Accuracy was about the same as your reporting. Range day 8208 AR Comp data - Kilco - 02-21-2016 Whats the max COAL in the Grendel mags? Also what kind of SD and ES did you see with those two powders? Range day 8208 AR Comp data - Cornbread - 02-21-2016 ASC mags 2.3 max coal. Amax SD 12, ES 32 SST SD12 ES 24 Both the above averages are skewed a bit by one group that had es of 50 excluding that group SD was around 9.5 and ES 19 Range day 8208 AR Comp data - Cornbread - 02-21-2016 This was with a medium crimp from Lee factory crimp die. I have found that doing so reduces es presumably by providing more even neck tension and bullet release. Overall I have been satisfied with 8208. It burns clean, produces good velocity and is supposed to be temp stable. For hunting the accuracy with the SST has been aceptable. A little disappointed with the Amax. Will try a shorter coal. Might try some nosler cc or smk for target round. |