+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8)
+--- Thread: Did everyone know that Christiansen Arms is making Grendels? (/showthread.php?tid=1082)
Pages:
1
2
Did everyone know that Christiansen Arms is making Grendels? - gophernuts - 09-19-2011
Well the title says it all. The CA-15 Predator is available in 6.5 Grendel. How bad ass would that set up be? I would never spend that much money but they do make nice rifles.
http://www.store.christensenarms.com/CA-15-Recon-Steel-Barrel_p_154.html
http://www.store.christensenarms.com/CA-15-Predator_p_64.html
Did everyone know that Christiansen Arms is making Grendels? - Costa - 09-19-2011
That is one expensive firearm. That being said I do like the carbon fiber barrel. I always wondered why you don't see any manufacturers using carbon fiber in their products like we have seen in other markets ie. cell phone and dash covers. Now if they would only sell the barrel separate. Also their build your own feature stinks. No where near the amount of selection I was hoping for as far as stocks and triggers.
Did everyone know that Christiansen Arms is making Grendels? - Snew - 09-20-2011
Youually, and you can call me kooky, one would expect to have a link to click when another is making a post like this. Just sayin'.
Did everyone know that Christiansen Arms is making Grendels? - bwaites - 09-20-2011
Snew Wrote:Youually, and you can call me kooky, one would expect to have a link to click when another is making a post like this. Just sayin'.
Added links, so there you go!
Did everyone know that Christiansen Arms is making Grendels? - StoneTower - 09-20-2011
How much does the the carbon version weigh? What makes it special is the lightweight barrel.
Did everyone know that Christiansen Arms is making Grendels? - blackfoot - 09-21-2011
Costa Wrote:That is one expensive firearm. That being said I do like the carbon fiber barrel. I always wondered why you don't see any manufacturers using carbon fiber in their products like we have seen in other markets ie. cell phone and dash covers. Now if they would only sell the barrel separate. Also their build your own feature stinks. No where near the amount of selection I was hoping for as far as stocks and triggers.
They do sell barrels seperate, or you can send them yours and they will turn in down and wrap it in carbon fiber.
Did everyone know that Christiansen Arms is making Grendels? - Costa - 09-21-2011
Thanks, I'll have to look in to that.
Did everyone know that Christiansen Arms is making Grendels? - LRRPF52 - 09-21-2011
I've handled some of their rifles at 'Get Some Guns' in Murray, UT. They seem to be very well-built, using nothing but high-end components, and they are noticeably lightweight. The receivers are Nickel Boron plated, which is cool-looking, and may add some benefits in longevity. They are definitely a niche market fire-stick maker for customers who shell out the big bucks. I'm personally opposed to op-rod systems in the AR, but they are such a craze in the AR market based on all the gun rag articles about them.
Did everyone know that Christiansen Arms is making Grendels? - gmar - 09-22-2011
They look like nice rifles, I really like the look of the predator handguards.
Did everyone know that Christiansen Arms is making Grendels? - Varoum - 09-29-2011
After searching, I decided to order with them. http://proofresearch.com/
I have one barrel in order for a wildcat caliber. Heat dissipation is much greater. The wrapping process is different. One is wrapping carbon like toilet paper. The other takes one sheet. Makes a hole and slide it in. Sorry for the exemple in this analogy.
More expensive then the other. Just a bit heavier maybe less than one once.
While deciding which compagny to order from. I wrote to them. Christensenarms will make, just, the barrel with your specs http://www.store.christensenarms.com/crm.asp?action=contactus
Did everyone know that Christiansen Arms is making Grendels? - LRRPF52 - 09-29-2011
That is very interesting. I know guys with carbon fiber wrapped barrels. Carbon fiber barrels are usually wrapped in a diagonal pattern. Since carbon molecules are composed of atoms perfectly aligned at 90 degree angles, that refuse to flex under stress, it is an awesome material to use in high-stress applications.
The .338 Edge group at the proofresearch site is pretty phenomenal... 3.11" group at 1124 yards. A buddy of mine who is huge into long-range shooting bought a Sako TRG .338 LM with the intention of re-barreling it right off the bat. He decided to just check and see how it would do at 1000yds, so he loaded up some 250gr Scenars, zeroed it, dialed in his 1000yd dope, and shot a 2.5" 3-round group first time. "I ain't changin' a thing!" There are guys now making regular 1st-round hits with .338 LM at 2000m when the wind is low, using the 300gr Scenars.
Did everyone know that Christiansen Arms is making Grendels? - StoneTower - 09-29-2011
I just called Christiansen Arms and they want $1200.00 for a 20" Grendel barrel. The barrel weighs about 2 pounds. Weight of their completed 20" rifle without scope or mount is around 6 pounds.
Did everyone know that Christiansen Arms is making Grendels? - blackfoot - 09-29-2011
Last I checked they wanted around $600 to turn down and wrap an existing barrel.
Did everyone know that Christiansen Arms is making Grendels? - Varoum - 09-30-2011
$600 is about what they wanted in the first place. Geee $1,200 It is cheaper with emails
Did everyone know that Christiansen Arms is making Grendels? - StoneTower - 09-30-2011
Maybe the guy I talked to did not know, but he told me that they had to supply the barrel. He did not know the exact weight of a 20" barrel so he put me on hold and came back in about 5 minutes after he had put one on the scale. They may not want to compete with themselves and might want to sell complete rifles.
I wish we could get a group by going where we could get the price down to where I could afford to get one. I would love to have a 20-22" carbon wrapped barrel for my hunting rig.
Did everyone know that Christiansen Arms is making Grendels? - blackfoot - 09-30-2011
I know both companies that do carbon fiber barrels (including Christensen) were offering a service to turn down and wrap your barrel not too long ago, I assume they still do. I know a gunsmith that buys barrels from Christensen and threads and chambers them for his custom lightweight rifles. They use Shilen blanks, or used to. I don't know about an existing AR barrel though, since the gas port would already be drilled?
Did everyone know that Christiansen Arms is making Grendels? - Varoum - 09-30-2011
Just the barrel for the carbon wrap process is around $400. http://saternmachining.com/prices_of_custom_barrels
Did everyone know that Christiansen Arms is making Grendels? - Varoum - 09-30-2011
Well so much for carbon barrels for the Minis Here is a quote from where I wanted build my rifles.
It will not work well for the Mini 14 1) operating rod is going to be rubbing on the bottom of the barrel. Not good for carbon fiber. 2) The gas port will be drilled through the barrel into the bore Hot gas are not good for the carbon fiber either.
Did everyone know that Christiansen Arms is making Grendels? - StoneTower - 09-30-2011
Varoum Wrote:Well so much for carbon barrels for the Minis Here is a quote from where I wanted build my rifles.
It will not work well for the Mini 14 1) operating rod is going to be rubbing on the bottom of the barrel. Not good for carbon fiber. 2) The gas port will be drilled through the barrel into the bore Hot gas are not good for the carbon fiber either.
On an Ar15 barrel, they leave the portion of the barrel that the gas block clamps on in metal and wrap the remaining portion in carbon.
Did everyone know that Christiansen Arms is making Grendels? - Varoum - 10-01-2011
Will contact http://proofresearch.com/ next week. They are the one capable to answer this question. Thanks StoneTower!
I just send a message to proofresearch this morning quoting the two objections from http://www.accuracysystemsinc.com/index.php
Will keep you informed.