+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel Bolt Actions & Single Shots (https://65grendel.com/forumdisplay.php?fid=17)
+--- Thread: New Semi Custom Bolt Action Grendel Complete (/showthread.php?tid=10096)
New Semi Custom Bolt Action Grendel Complete - smcdurmon - 11-04-2015
My Gunsmith finished my Semi Custom Grendel Built and I may have an AR Grendel Upper for sale now.
Rifle specs are:
Blueprinted Remington 700 Short Action with PTG Bolt, Glass Bedded in an HS Precision Stock, Krieger 24" #4 contour 1:9 twist 5R barrel, factory trigger worked to a crisp 2.5lbs topped off with Talley Ring Mounts and Vortex Viper HS-LR 4-16x50.
[ATTACH=CONFIG]7053[/ATTACH]
[ATTACH=CONFIG]7054[/ATTACH]
[ATTACH=CONFIG]7055[/ATTACH]
Sorry, don't have pics of the groups, but the rifle will shoot factory Hornady Amax ammo in the 0.3s. Plan on working up some loads for it after Deer Season.
Took a GA Whitetail Buck with the rifle and pics of the kill can be found in the Hunting Section.
New Semi Custom Bolt Action Grendel Complete - JASmith - 11-04-2015
Sounds like a great build.
It could also make a few AR shooters green-eyed with envy!
New Semi Custom Bolt Action Grendel Complete - montana - 11-04-2015
Beautiful, thanks for sharing.
New Semi Custom Bolt Action Grendel Complete - smcdurmon - 11-05-2015
Thanks. I am glad I went ahead and decided to get this rifle built. Its fun to shoot, accurate and has very little recoil.
New Semi Custom Bolt Action Grendel Complete - ricsmall - 11-05-2015
Nice build!! Very similar to build I have in the works. Would u change barrel contour to lighter or heavier? I was thinking about bartlein 3b. Still undecided on bottom metal. Is yours saami chamber? What's the approximate weight? Sorry so many questions, just looking for ideas to help me make up my mind.
Edit: one more question, which magazine box, follower, spring are you running? (Caliber wise)
Richard
New Semi Custom Bolt Action Grendel Complete - smcdurmon - 11-05-2015
Richard
Thanks.
The rifle including scope is probably in the 10lb+/- range, but I haven't put it on scales yet. Its feels slightly heavier than my AR Grendel, which weighs in at 9.25lbs scoped. If you like lighter rifles, I would suggest going with a lighter contour. I kind of wish I would have went at least one contour lower like a 3b and also added flutes. The scope I chose is also a little heavy, but I plan on upgrading the glass after Deer Season to a lighter scope and better glass.
I wanted my rifle as an ADL style with no bottom metal. I don't mind unloading the rifle from the top, which I usually do even if I have bottom metal. Yes, my rifle is SAAMI Chambered.
I'm not sure what follower, magazine box and spring my Gunsmith used for the build, but it looks to be the same one that was in the rifle when I took it to him to do my build. He may have changed the follower since the rifle I took him to build off of was a 243. The Grendel round has a lot of room in the magazine box (length wise) so I make sure to slide my rounds back as far as they will go when loading.
Good luck with your build. I'm sure you will enjoy it once its finished.
New Semi Custom Bolt Action Grendel Complete - LRRPF52 - 11-05-2015
That looks beautiful.
New Semi Custom Bolt Action Grendel Complete - smcdurmon - 11-05-2015
Thanks.
New Semi Custom Bolt Action Grendel Complete - am4966 - 11-05-2015
Very nice!
New Semi Custom Bolt Action Grendel Complete - Drift - 11-06-2015
Beautiful! And just think, 6.5 Billion people on earth ( probably twice that many guns) and NO ONE BUT YOU have a rifle quit like that.
New Semi Custom Bolt Action Grendel Complete - smcdurmon - 11-06-2015
Thanks. Nice point Drift.