+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: 6.5 GRENDEL DISCUSSION FORUMS (https://65grendel.com/forumdisplay.php?fid=3)
+--- Forum: 6.5 Grendel ARs and Other Semi-Autos (https://65grendel.com/forumdisplay.php?fid=8)
+--- Thread: Bolt Group Buy - Possible? (/showthread.php?tid=6048)
Bolt Group Buy - Possible? - wiersy111 - 08-27-2013
There is a simple answer and that would be go to another source that has the ammo on hand. AA tends to have long wait times if waiting is not in your future why order from them? I am patiently waiting for parts since early December, because Bill is the designer of the Grendel and that is exactly why I am waiting for my parts! Bill has a very unique business location on a military installation. There are not very many businesses that are allowed to operate on a military installation. I do not know exactly why he is allowed to operate there but I can speculate. There has been a lot of interest in the Gendel in the military world that is where I learned about the Grendel. It was a retired Special Forces Operator that introduced me to the Grengel world. I consider myself lucky to be waiting AA parts.
Bolt Group Buy - Possible? - explorecaves - 08-27-2013
And how are these last few posts related to the group buy?
Bolt Group Buy - Possible? - wiersy111 - 08-27-2013
Good catch I didn't notice which thread we were in......sorry.
Bolt Group Buy - Possible? - cory - 08-27-2013
explorecaves Wrote:And how are these last few posts related to the group buy?
+1
Bolt Group Buy - Possible? - Tedward - 08-27-2013
Tedward Wrote:As I said and Xcountry, Franks got it under control. I spoke to him today and it is a pressure test. All of our answers are wrong. baaaa.
He doesn't want to elaborate and say something wrong or me translate what he said wrong, so the exact information will be posted soon. by another forum member who has the knowledge to explain correctly. Either way, no worries.
Ok, the way I understand it is the bolt is put into a press so the lugs set on the surface, I guess like a tube to put all the load on the lugs. Then a press with some great pressure is used and a hardened object, dowel, is placed on the surface of the bolt face where the bullet would make contact. Then pressure is applied, I don't know if they put 50,000 lbs and increase for it to withstand 70,000 lbs or it to explode at 80,000 lbs. I don't know the lbs that are acceptable and when they call it good or what the acceptable parameters are.
Maybe Precession Firearms can clear the air on this process. Mark??
Bolt Group Buy - Possible? - Dan - 08-27-2013
I would be interested in a full BCG. Looking forward to seeing what he can do it for.
Bolt Group Buy - Possible? - Tedward - 08-27-2013
Dan Wrote:I would be interested in a full BCG. Looking forward to seeing what he can do it for.Frank sent me a text today and did say the Complete BCG is going to be available. Once the items are ready and distribution is set up info will follow with pricing.
Bolt Group Buy - Possible? - stevegun 1 - 08-27-2013
Tedward, thanks again for keeping the info coming. If available, I think I'll opt for 2 complete BCG's instead of just the bolts.
Bolt Group Buy - Possible? - Dan - 08-28-2013
Awesome, thanks for doing the legwork on this one.
Bolt Group Buy - Possible? - explorecaves - 08-28-2013
Tedward Wrote:Frank sent me a text today and did say the Complete BCG is going to be available. Once the items are ready and distribution is set up info will follow with pricing.
Did he give an estimation on when that will be?
Bolt Group Buy - Possible? - Tedward - 08-28-2013
explorecaves Wrote:Did he give an estimation on when that will be?
There in the milling process now and the way he made it sound, some will be going out for heat treating and shot peening then testing next week or two. All I can say is you will have them before the barrels are done if that helps. I would like to get one to Dan as soon there ready so that will be top priority too.
Bolt Group Buy - Possible? - XcountryRider - 08-28-2013
Tedward Wrote:There in the milling process now and the way he made it sound, some will be going out for heat treating and shot peening then testing next week or two. All I can say is you will have them before the barrels are done if that helps. I would like to get one to Dan as soon there ready so that will be top priority too.
Did he mention if he was going to make the extractors?
Bolt Group Buy - Possible? - cory - 08-28-2013
Tedward Wrote:Would like to get one to Dan as soon there ready so that will be top priority too.
+1
Bolt Group Buy - Possible? - Tedward - 08-28-2013
Update, picture of bolt in process. Sent via I-phone [ATTACH=CONFIG]3752[/ATTACH]
Bolt Group Buy - Possible? - ricsmall - 08-29-2013
Looking good so far. This endeavor should help several companies out of a tight on bolt/barrel combos.
Bolt Group Buy - Possible? - peligro113 - 08-29-2013
That pic of the bolt looks good I might order 2 bolts
Bolt Group Buy - Possible? - Walter - 09-04-2013
Any update for the week?
Bolt Group Buy - Possible? - Tedward - 09-05-2013
Walter Wrote:Any update for the week?
No, I called him and sent a text. He might be dealing with the kids going back to school.
He'll be in touch and I'll post info.
Bolt Group Buy - Possible? - LongRanger - 09-05-2013
Put me down for two. It may be a faster way to get them than waiting on Alexander Arms. Ordered several items in January and not heard a peep from them since then. Darn good thing that they don't charge anything up front.
Bolt Group Buy - Possible? - DW61 - 09-05-2013
I would be interested in getting one complete bolt or BCG if at a reasonable price. Sorry if I missed it, but is this going to be a group or individual order?