6.5 Grendel Forum
Now Shipping: 6.5 Grendel Chamber Brushes - Printable Version

+- 6.5 Grendel Forum (https://65grendel.com)
+-- Forum: INDUSTRY PARTNERS (https://65grendel.com/forumdisplay.php?fid=7)
+--- Forum: AR15 Build Box (https://65grendel.com/forumdisplay.php?fid=32)
+--- Thread: Now Shipping: 6.5 Grendel Chamber Brushes (/showthread.php?tid=15634)

Pages: 1 2 3 4 5 6 7 8 9 10

Now Shipping: 6.5 Grendel Chamber Brushes - montana - 08-28-2018

I received my brushes.

Now Shipping: 6.5 Grendel Chamber Brushes - ricsmall - 08-28-2018

I received my brushes as well. Thanks again

Now Shipping: 6.5 Grendel Chamber Brushes - Seitz333 - 09-01-2018

Just placed an order for 1.

Now Shipping: 6.5 Grendel Chamber Brushes - cbe1962 - 09-02-2018

I have mine. Thanks!

Now Shipping: 6.5 Grendel Chamber Brushes - A.D.D. AR - 09-04-2018

Ordered two brushes. Thanks LRR!! this is a great item to have for the grendel.

Now Shipping: 6.5 Grendel Chamber Brushes - phishfood - 09-08-2018

phishfood Wrote:I would be in for a couple.

Edit: Just ordered a 2 pack.
That was on 8/17.

Received them the next week, so shipping was prompt.

Now Shipping: 6.5 Grendel Chamber Brushes - A.D.D. AR - 09-08-2018

got my brushes today. Thanks LRR!! Much appreciated.

Now Shipping: 6.5 Grendel Chamber Brushes - LongPoke - 09-12-2018

Ordered! I new to this. Do these things let you know when they're wore out? About how many uses should you get from them? And did I read correctly that some of y'all chuck the cleaning rod in your drill?

Now Shipping: 6.5 Grendel Chamber Brushes - LRRPF52 - 09-14-2018

LongPoke Wrote:Ordered! I new to this. Do these things let you know when they're wore out? About how many uses should you get from them? And did I read correctly that some of y'all chuck the cleaning rod in your drill?

When you start to feel less resistance in the chamber, you can just wrap them with patches.

I used mine to clean out a new Faxon 12" group buy barrel. When I tested it with one of my dummy rounds, the round didn't seat cleanly at first. Felt like there was something else in the chamber, and I had to rod the cartridge out.

Spun the chamber brush in it, cartridge drops in and out with a breeze.

Yes, I thread the brush onto a cleaning rod section, chuck that in a drill, and polish that way moving in and out of the chamber.

Now Shipping: 6.5 Grendel Chamber Brushes - LRRPF52 - 10-11-2018

Just a reminder:

When you order the Grendel Handbooks, you can also order the chamber brushes.

I need to put a reminder because I think a lot of people are doing searches for Grendel Reloading, then they find the Handbooks but don't see the chamber brushes.

Now Shipping: 6.5 Grendel Chamber Brushes - Bobke - 10-11-2018

Just ordered 3pkgs. Good work, Paul.

Now Shipping: 6.5 Grendel Chamber Brushes - Wargrendeleagle - 10-14-2018

Ordered two packs today. I wish I had ordered them when I got both volumes of the books. But it win some you lose some. The books have been great reading so far. Ready to get the brushes going soon

Now Shipping: 6.5 Grendel Chamber Brushes - LRRPF52 - 10-23-2018

Almost out of the initial batch.

Now Shipping: 6.5 Grendel Chamber Brushes - Keef - 10-23-2018

Thanks for the heads up, just ordered 2 pair.

Now Shipping: 6.5 Grendel Chamber Brushes - AR15gunner - 11-12-2018

Thanks LRRPF52, just ordered 2 sets , hope you still have them in stock.

Now Shipping: 6.5 Grendel Chamber Brushes - Nodak - 12-19-2018

Just ordered a set. Should be better than a wrapped 556 brush.

Now Shipping: 6.5 Grendel Chamber Brushes - LRRPF52 - 12-19-2018

Nodak Wrote:Just ordered a set. Should be better than a wrapped 556 brush.

First batch is gone, more are on the way.

They're a regular item now.

Now Shipping: 6.5 Grendel Chamber Brushes - LRRPF52 - 12-28-2018

Still shipping these with a fresh batch in-stock.

Just dropped off a shipment today for whoever ordered before Christmas.

Now Shipping: 6.5 Grendel Chamber Brushes - LRRPF52 - 01-02-2019

Is everybody getting their orders ok in all the craziness of the holiday shopping season?

Now Shipping: 6.5 Grendel Chamber Brushes - 41bear - 01-27-2019

LRRPF52 Wrote:When you start to feel less resistance in the chamber, you can just wrap them with patches.

I used mine to clean out a new Faxon 12" group buy barrel. When I tested it with one of my dummy rounds, the round didn't seat cleanly at first. Felt like there was something else in the chamber, and I had to rod the cartridge out.

Spun the chamber brush in it, cartridge drops in and out with a breeze.

Yes, I thread the brush onto a cleaning rod section, chuck that in a drill, and polish that way moving in and out of the chamber.

Just did the same on a new 16" build and it works like a charm, thanks again for making these, will order some more down the road.